Transition Networks CPSMC0800-100 manual Network Management, Hardware Connections, network mgmt

Models: CPSMC0810-100 CPSMC0800-100

1 30
Download 30 pages 26.95 Kb
Page 22
Image 22
5 Network Management

CPSMC08xx-100 PointSystem™ Chassis

5 Network Management

The CPSMM100 firmware and the FocalPoint™ application are described in the FocalPoint™ 2.0 Management Application and CPSMM100 Firmware user’s guide (P/N 33293). This manual is included on the application CD and is also available on-line at www.transition.com.

Transition Networks CPSMM100 firmware is embedded in the optional management modules (see section 2.2). The firmware allows the network administrator to configure and manage the CPSMC08xx-100 chassis from an attached terminal or from a remote, networked computer.

The firmware includes the Transition Networks Command Line Interface (CLI), a telnet server, a Web browser, and an SNMP (Simple Network Management Protocol) agent.

In addition, Transition Networks FocalPoint™ application can be installed in the networked computer to provide a graphical user interface to monitor the PointSystem™ chassis.

5.1Hardware Connections

Network management can be accessed either through the DB-9 serial port or through the RJ-45 Ethernet port of the management modules.

 

CPSMM-120

TX PWR

RX LNK

RESET

CPSMM120

 

 

10BASE-T

SERIAL

RJ-45 Ethernet Port

DB-9 Serial Port

 

 

RESET

DB-9

PWR

LNK

 

TX

RX

 

 

 

 

 

CPSMM200

 

10BASE-T

IN

OUT

CPSMM-200

network mgmt.

24 hour Technical Support: 1-800-260-1312-- International: 00-1-952-941-7600

22

Page 22
Image 22
Transition Networks CPSMC0800-100 Network Management, Hardware Connections, network mgmt, RJ-45 Ethernet Port, CPSMM-200