CPSMC08xx-100 PointSystem™ Chassis
1 Introduction
1.1Description
The Transition Networks PointSystem™ CPSMC08xx-100 is a 19-inch, rack- mountable chassis for selected Transition Networks media converter slide-in- modules. The chassis allows the network administrator to connect various copper and fiber-optic network media over protocols that include Ethernet, Fast Ethernet, DS3/E3, and OC-12. The chassis provides installation space for up to eight (8) single-slot or four (4) dual-slot media converter slide-in-modules in the front of the unit.
Management Module Installed Slide-In-Module | Open Slot | Power Inlet |
TXPWR | RXLNK | RESET | TERM | INIT | 12C | 12C-1 | PWR | LKS | LKM | TX | | RX | TX | | RX | SPD PWR | FRX FLNK | CRX CLNK | TX | 10/100SX | RX | 10/100TX | CFETF110 | | | | | | | | | 50/60 Hz |
| | | | DB-9 | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Input Power: |
| | | | | | | | | | | Singlemode | | | Multimode | | | | | | | | | | | | | | | | | | | | 110-240 VAC |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1.6A max. (60W max) |
| 10BASE-T | | INPORT | OUTPORT | MCCM10 MGMTMASTER | | | | | | | | PWR | LKS | LKM | TX | Singlemode | RX | TX | Multimode | RX | | SPD PWR | FRX FLNK | CRX CLNK | TX | 10/100SX | RX | 10/100TX | CFETF110 | CPSMC-0800 |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 8-Slot Chassis |
The CPSMC0800-100 comes equipped with an AC power supply. The CPSMC0810- 100 comes equipped with a DC power supply. An optional, auxiliary AC or DC power supply with instant fail over operation is also available for either model. The primary power supply is accessed through the power inlet on the front panel, while auxiliary power is accessed through the auxiliary power inlet, located on the back panel.
Grounding Lugs | Auxiliary Power Inlet |
| | | | |
| | | | |
| | | | |
The CPSMC08xx-100 also comes equipped with a pair of grounding lugs for providing proper grounding of the chassis.
Multiple fans help remove heat from the chassis.
With installed PointSystem™ management module(s) (P/N CPSMM-120, -200, or -210), the CPSMC08xx-100 can be managed and monitored via:
•An SNMP application such as Transition Networks FocalPoint™ management software installed at a remote Network Management Station (NMS).
•A remote Web browser.
•A command-line interface (CLI) at an attached terminal.
•A command-line-interface (CLI) at a remote Telnet connection.
The management modules also make it possible to control up to eight (8) cascaded chassis, fully-populated with installed media converter slide-in-modules.
