3 Powering the CPSMC08xx-100
The
NOTE: The
•Power up the chassis by connecting the power supply.
•
NOTE: Contact Technical Support for any questions concerning power supply.
3.1Primary Power Supply 3.1.1 AC Power Supply
The
Power Inlet
Input Power:
1.6A max. (60W max)
50/60 Hz
Power Cord
To power the
1.Connect the female end of the power cord to the power inlet on the front panel of the chassis.
2.Plug the male end of the power cord into the correct voltage rack or wall socket.
3.Verify that the chassis is powered by observing the illuminated power LEDs on the installed
power supply
24 hour Technical Support: | 12 |