Toro 3280-D Groundsmaster 3280/3320 Attachments, Cab, Model, Rotary Brooms, V-Plow,Model

Groundsmaster® 3280/3320 Attachments

Specifications* (continued)

	DEBRIS BLOWER, MODEL 30823
POWER SOURCE	Groundsmaster 3250/3320 tractors-PTO drive.
	Belt drive.
HITCH/MOUNT
	Out-front design for Groundsmaster tractors.
FRAME
	All welded steel construction.
BEARINGS
	2 self-sealed, self-aligning.
IMPELLER	12 blades, reversed curve, 21" (53.3 cm)
	diameter, sandcast aluminum.
AIR MOVEMENT	130 mph (209 km/h)@ 2700 rpm, 3650 cfm
DIRECTIONAL	All steel, over-center locking, spring tension
CHUTE	control, operated from tractor seat.
DIMENSIONS	Length	Width	Height
	46" (117 cm)	35.6" (90 cm)	34.9" (89 cm)
SHIPPING WEIGHT
	300 lbs. (136 kg)

BODY/FRAME

GLASS

DOORS

INTERIOR

ELECTRICAL

HVAC

CAB, MODEL 30391

ROPS engineered and certified frame, Toro red color-capped plastic roof and body panels, rubber isolator mounts. Front worklights.

Greylite tinted glass, tempered glass windshield, all-glass tempered door(s), 2-speed front windshield wiper.

Left: key locking, interior handhold/grab bar,

gas assist open. Right and left: opening swing out.

Pre-cut textured neoprene floormat, grey upholstered interior side and rear panels, grey upholstered interior headliner, roof-mounted black color-capped plastic headliner/console.

Full wiring harness with fuse box.

Console-mounted pressurized fan, interior louvers and heater.

	ROTARY BROOMS**
	MECHANICAL
TYPE	Windrow type, front mounted mechanical drive
	broom. Manual angling, 30 degrees left and
	right.
BROOM SIZE	20" (50.8 cm) diameter brush x 48" (122 cm),
	60" (152 cm) width.
BRUSH	Sectional brushwith choice ofpolypropylene,
	wire or combination radial segments.
SHIPPING WEIGHT	48" Broom: 450 lbs., (204 kg).
	60" Broom: 500 lbs., (227 kg).
OPTIONS	Hydraulic Swing Cylinder, Electric Swing
	Mechanism, Dirt Deflector, Storage Stands.

SUNSHADE

UNIVERSAL MOUNT Model 30359

STAGE WIDTH OF CUT OVERALL HEIGHT INTAKE HEIGHT WEIGHT CUTTING EDGE SKID SHOES

AUGUER DIAMETER FAN DIAMETER FAN SPEED CHUTE ROTATION

CHUTE DEFLECTION

ERSKINE SNOW BLOWER***

2

53"

47"

22"

325 lbs.

51" Bolt-on, hardened

Adjustable, hardened

12"

16"

870RPM Hydraulic Electric

BIMINI CANVAS	Model 30358
	V-PLOW, MODEL 30750
CUTTING WIDTH	48" (121.9 cm)
HITCH/MOUNT	Outfront design for Groundsmaster tractors.
	Mounting Kit 30311 required for installation.
CONSTRUCTION
	All welded steel.

*Information regarding non-Toro (Allied Vendor) products is included in the Toro Golf and Grounds Equipment Guide as a convenience to Toro customers. Toro does not warrant, endorse or support any products purchased from Allied vendors. Additionally, Toro shall not be responsible for any personal injury or property damage, whether direct or consequential, caused by such Allied products. Toro does not certify fit up, compatibility or functionality of Allied products.

**Manufactured by M-B Companies, Inc.

***Manufactured by Erskine. Depending on mower configuration, an electrical accessory kit (Toro model 30382) and auxiliary valve kit (Toro model 110-5670) must be added to the tractor