TORO GM 325-D

Mitsubishi K3D Diesel Engine 27

 

 

Troubleshooting:

High and Low Idle Checks.

The idle settings are important for the proper operation and long life of the machine.

Affects of incorrect idle speeds:

1.High idle too slow.

∙Low power. (Engine not running at full speed)

∙Slow transport speed. (Hydrostatic transmission input shaft speed too slow)

∙Poor Quality of cut. (Blade RPM and tip speed too slow)

2.High idle too fast.

∙Internal engine damage. (Excessive engine RPM can damage crankshaft and bearings)

∙Hydrostatic transmission damage. (insufficient lubrication for high input shaft speeds)

∙Engine overheating.

3.Low idle too slow.

∙Hydrostatic transmission damage.(lack of lubrication)

Checking Idle Speeds

1.Run the engine until it reaches normal operating temperature.

2.Move the throttle lever to the low idle position.

∙Low idle should be 1500 ± 50.

3.Open the throttle to the high idle position.

∙ High idle should be 3145 - 3200.

Note: if the high and low idle is incorrect, refer to the Operators Manual for the correct adjustment procedures

Notes

________________________________________________________________________________________________________________

________________________________________________________________________________________________________________

________________________________________________________________________________________________________________

________________________________________________________________________________________________________________

________________________________________________________________________________________________________________

________________________________________________________________________________________________________________

________________________________________________________________________________________________________________

________________________________________________________________________________________________________________

________________________________________________________________________________________________________________

Page 28 Page 30
Page 29
Image 29
Toro 325-D, 345 manual Troubleshooting
Page 28 Page 30

325-D, 345 specifications

The Toro 345,325-D is a highly efficient and versatile piece of turf maintenance equipment, designed primarily for golf courses, sports fields, and large landscape areas. This machine is renowned for its exceptional performance, durability, and ease of use, making it a favorite among turf management professionals.

One of the standout features of the Toro 345,325-D is its advanced engine technology. Equipped with a powerful and fuel-efficient diesel engine, it delivers impressive torque and reliability while minimizing fuel consumption. This means operators can complete their tasks efficiently without frequent refueling, a critical factor in maintaining productivity on large properties.

The Toro 345,325-D is designed with operator comfort in mind. It features a spacious, ergonomically designed operator platform that reduces fatigue during long hours of operation. The machine also boasts intuitive controls, allowing users of all skill levels to maneuver it with ease. The adjustable seat and climate control ensure that operators remain comfortable, regardless of the weather conditions.

In terms of cutting performance, the Toro 345,325-D is equipped with a high-quality cutting deck that delivers a precise and consistent cut. The deck design allows for exceptional maneuverability, even in tight spaces, ensuring that operators can maintain an immaculate appearance across a variety of terrains. With multiple cutting heights available, it caters to different turf types and aesthetic requirements.

Another key characteristic of the Toro 345,325-D is its rugged build quality. Constructed with robust materials, the machine withstands the rigors of daily use, ensuring longevity and reducing maintenance costs. Additionally, Toro's commitment to innovation includes incorporating advanced diagnostic systems to monitor the machine's health and performance, allowing for proactive maintenance and minimizing downtime.

The Toro 345,325-D is also equipped with advanced safety features, including operator presence controls and stability enhancements, which ensure safe operation on slopes and uneven ground. This level of safety not only protects the operator but also minimizes the risk of damage to the turf.

In summary, the Toro 345,325-D stands out as an industry-leading solution for turf maintenance. With its powerful engine, operator-friendly design, superior cutting performance, and robust construction, it provides unmatched reliability and efficiency. Whether for a golf course, sports field, or park, this machine is an indispensable tool for maintaining pristine landscapes. Its commitment to quality and performance makes it a preferred choice for turf management professionals worldwide.
Top Page Image Contents