Starting the Engine
1.Turn the ignition key clockwise to the On position (Figure 11).
Stopping the Engine
To stop the engine, turn the ignition key counterclockwise to the Off position (Figure 15).
Figure 11 | Figure 15 |
2. Move the choke lever to the right (Figure 12).
Figure 12
3.Firmly push in the primer 2 times with your thumb, holding the primer in for a second before releasing it each time (Figure 13).
Starting the Rotor Blades
To start the rotor blades, hold the control bar against the handle (Figure 16).
Figure 13
4. Pull the recoil starter (Figure 14).
Figure 14
5.With the engine running, move the choke lever to the left slowly.
Figure 16
1. Control bar
Stopping the Rotor Blades
To stop the rotor blades, release the control bar (Figure 17).
Figure 17
8
