Toshiba 13A25C manual To Memorize Channels, Adjusting the Picture, To ADD/DELETE Channels

〈 0 – 9 / + / – / ENTER / MENU 〉

TO MEMORIZE CHANNELS
This TV is equipped with a channel memory feature that allows the					TO ADD/DELETE CHANNELS		MENU
TV to skip up or down to the next channel set into memory, skip-
					1	Press MENU.		ON
ping over unwanted channels.								CHSETUP
Before selecting channels, they must be programmed into the TV’s						Press SET + or – until the indicator next to
memory. In addition to normal VHF and UHF channels, this TV can					2			PICTURE
						“CH SETUP” begins to flash, then press		ANGUAGE
receive up to 113 Cable TV channels. To use this TV with an								LOCK
antenna, set the TV/CABLE menu option to the TV setting. When						ENTER.
shipped from the factory, this menu option is in the CABLE setting.							〈 +/–/ENTIMER/MENU〉
TV/CABLE SELECTION					3	Press SET + or – until the indicator
						next to “ADD/DELETE” begins to		TV CABLE
				LOCK
1	Press MENU.		MENUPICTURECHSETUP			flash, then press ENTER.		AUTO CH MEMORY
								ADD / DELETE
2	Press SET + or – until the indicator next to				4	Select the desired channels to be	〈 + / – / ENTER / MENU 〉
	“CH SETUP” begins to flash, then press			ANGUAGE		added or deleted using the Direct
	ENTER.			ON		Channel Selection buttons (0–9), CH +
	Press SET + or – until the indicator next					or –, SET + or –.
3		〈 +/–/ENTIMER/MENU〉
	to “TV/CABLE” begins to flash.
				TV CABLE	5	Press ENTER to select ADD or DELETE.
4	Press ENTER to select the TV or CABLE			AUTO CH MEMORY		If an unmemorized channel was selected (step 4), the
	mode. The arrow indicates the selected			ADD / DELETE		channel indication will be red. Press ENTER if you wish
	mode.	〈 + / – / ENTER / MENU 〉				to ADD the unmemorized channel. The channel indica-
						tor will change from red to green when a channel is
5	Press MENU repeatedly until the menu					added and the channel will be memorized.
	screen is cleared.

NOTE:

Contact your cable company to determine the type of cable system used in your area.

AUTOMATIC CHANNEL MEMORY

1	Press MENU.		MENUPICTURECHSETUP
2	Press SET + or – until the indicator next to		ANGUAGE
			LOCK
	“CH SETUP” begins to flash, then press		ON
	ENTER.
		〈 +/–/ENTIMER/MENU〉
3	Press SET + or – until the indicator next
	to “AUTO CH MEMORY” begins to flash,		TV CABLE
	then press ENTER. The TV will begin		AUTO CH MEMORY
	memorizing all the channels available in		ADD / DELETE
	your area. Channel numbers will remain	〈 + / – / ENTER / MENU 〉
	red until auto memorizing is complete.

6

If a memorized channel was selected (step 4), the chan- nel indication will be green. To delete the channel from memory, press ENTER repeatedly until

“DEL” appears on-screen. The channel ADDCH 012 indicator will change from green to red

when a channel is deleted. Repeat steps 4 and 5 for each channel to be added or deleted.

Press MENU repeatedly until the menu screen is cleared.

4

Press MENU repeatedly until the menu screen is cleared.

ADJUSTING THE PICTURE

You can adjust the settings for brightness, contrast, color, tint and sharpness.

1	Press MENU.
2	Press SET + or – until the indicator next to “PICTURE”
	begins to flash, then press ENTER.
3	Press ENTER repeatedly to select the item you want to
	adjust.

BRIGHTNESS CONTRAST COLOR TINT SHARPNESS

4 Press SET + or – to adjust the setting.

	+	–
BRIGHTNESS	higher	lower
CONTRAST	lighter	darker
COLOR	deeper	paler
TINT	greenish	reddish
SHARPNESS	sharper	softer

TO RETURN TO INITIAL SETTING:

Press RESET while the picture adjusting mode appears on-screen.

9

J3M13221A(E)_P08-12 9 13/01/2005, 10:52 PM