Toshiba 14AF45C, 20AF45C appendix Locking channels

16

SELECT

GAME TIMER OFF NEW PIN CODE START

ADJUST

4.Use the Channel Number buttons (0–9) to enter your PIN code. If you are accessing the LOCK menus for the first time, select a four-digit number to be your PIN code. Press ENTER. The BLOCKING menu appears.

	CH
PICTURE AUDIO	SETUP OPTION
LOCK
CH LOCK	START
VIDEO LOCK	OFF
GAME TIMER	OFF
NEW PIN CODE	START
SELECT	ADJUST

5.You may now enable blocking. See “Locking channels” (below), “To change your PIN code” (below), “Locking video input” (page 17), or “Setting the GameTimerTM” (page 17) .

To change your PIN code:

1.Press MENU, then press a or b to display the OPTION menu.

2.Press c or d to highlight LOCK.

3.Press a or b to display the BLOCKING menu.

4.Use the Channel Number buttons (0–9) to enter your PIN code. Press ENTER. The BLOCKING menu appears.

5.Press c or d to highlight NEW PIN CODE and press a or b to display the NEW PIN CODE menu.

6.Use the Channel Number buttons (0–9) to enter a new code. Press ENTER.

7.Press EXIT to return to normal viewing.

Note:

If you forget your PIN code, press RECALL four times within five seconds from the BLOCKING menu. The PIN code will be released (BLOCKING RESET status restored).

Channel

Numbers

Recall

c d a b

Exit

Menu/

Enter

Using the TV’s Features

Locking channels

With the CH LOCK feature, you can lock specific channels. You will not be able to tune locked channels unless you clear the setting. You can choose to lock up to nine TV channels and nine cable channels.

To lock channels:

1.Use the Channel Number buttons (0–9) to display the television channel you wish to lock.

2.Press MENU, then press a or b to display the OPTION menu.

3.Press c or d to highlight LOCK.

4.Press a or b to display the LOCK menu.

5.Use the Channel Number buttons (0–9) to enter your PIN code, then press ENTER. The LOCK menu

appears.

6.	Press c or d to highlight CH LOCK		CH
		PICTURE AUDIO	SETUP OPTION
	and press a or b to display the CH
		LOCK
	LOCK menu.
		CH LOCK		START
7.	Press a or b to select the following:	VIDEO LOCK		OFF

• SET– to set the channel as one to be locked. Then press ENTER.

•CLEAR– to clear all channels from

the list of locked channels.
Then press ENTER.			CH
8. Repeat steps 1 through 7 to lock other	PICTURE	AUDIO	SETUP		OPTION
channels. When you are finished
	CH LOCK : CH 12
					CLEAR
locking channels, press EXIT to return	SET/CLEAR			SET
	LOCKED CH		0		0	0
to normal viewing.			0		0	0
	TV CABLE		0		0	0

If you try to tune a locked channel, the	SELECT	SET	ENTER
	END	EXIT
TV will not display it, but will display the
nearest unlocked channel.

Channel

Numbers

c d a b

Exit

Menu/

Enter

Note:

After programming CH LOCK, change channels before turning off the television.

J3S00221A(E)_P14-22 16 11/01/2005, 12:55 PM