Connecting external equipment continued,
Aerial cables:
Connect the aerial to the socket on the rear of the televi- sion. If you use a decoder and/or a media recorder it is essential that the aerial cable is connected through the decoder and/or through the media recorder to the televi- sion.
SCART leads:
Connect the media recorder IN/OUT socket to the televi- sion. Connect the decoder TV socket to the television. Connect the media recorder SAT socket to the decoder MEDIA RECORDER socket.
Before running APS (AUTO PROGRAMMING SYSTEM) put your decoder and media recorder to Standby.
A wide variety of external equipment can be connected to the back of the television, therefore the relevant owners manuals for all additional equipment must be referred to.
If connecting
If the television automatically switches over to monitor external equipment, return to normal television by pressing the desired programme position button. To recall external
equipment, press 
to select between TV, EXT1,
EXT2, S-Video or PC RGB.
Connecting the PC via PC input
•Power off both computer and TV before making any con- nections.
•Connect the PC cable to the PC input of your TV and to the
•Tighten the screws on the plugs until the connectors are fastened securely.
•For PC sound, use stereo jack socket located at the rear side of the TV.
English - 7 -
