To temporarily unblock programs

1If you try to watch a TV program that exceeds the rating limits you set, the TV will enter into the program block mode.

THIS PROGRAM HAS BEEN BLOCKED!

TV–PG L V

EXCEEDS SET LIMITS

PUSH MUTE TO ENTER PIN

CABLE 4

BLOCK CHANNEL function

With the CHANNEL BLOCK function, you can block specific channels. The TV will not be able to tune these channels with the CHANNEL s/t buttons or Channel Number buttons, unless you clear the setting.

This TV has 8 memory spaces total, 4 for TV mode and 4 for CABLE mode.

To block channels

1Select a channel you want to block.

2If you want to watch the blocked program temporarily, press MUTE.

Press the Number buttons (0-9) to enter the 4-digit code you have stored.

If the number is correct, the block mode will be released. After 1 second, normal picture will appear.

BLOCKING IS ACTIVE PLEASE ENTER PIN CODE TO TEMPORARILY UN-BLOCK

~~~–

SELECT[0-9] END[EXIT]

2Select “BLOCK CHAN- NEL” in the V-CHIP CONTROL menu by pressing t or s.

3Press T or S to display the BLOCK CHANNEL menu.

ENABLE BLOCKING SY N SET RATING

SET BLOCKING OPTIONS NEW PIN CODE BLOCK CHANNEL

MOVE[s t] SELECT[T S]

BLOCK CHANNEL

SSET CLEAR

0 0 0 0

Advanced Operation

SELECT[T S] SET[s t] END[EXIT]

All blocking is disabled until the TV is turned off. It will be enabled when the power is reapplied.

If a wrong pin code is entered, the message appears. Enter the correct code again.

INCORRECT PIN CODE PLEASE ENTER PIN CODE TO TEMPORARILY UN-BLOCK

~~~~

4 Press T or S to select “SET”, then press t or s until the channel number to be blocked (“2” in this example) replaces “0” on the display.

BLOCK CHANNEL

SSET CLEAR

0 0 0 2

SELECT[T S] SET[s t] END[EXIT]

SELECT[0-9] END[EXIT]

5Repeat steps 1 to 4 for other channels.

6Select another channel before turning off the TV.

To restore channels

1Select “CLEAR” follow- ing the above steps 2 to 4.

2Press t or s until “0” replaces the channel numbers.

BLOCK CHANNEL

SETS CLEAR

15 10 6 2

SELECT[T S] CLEAR[s t] END[EXIT]

0 0 0 0

3Press EXIT to erase the display.

17