Programming Channel Memory
The channel memory is the list of TV channel numbers your TV will stop on when you press the CHANNEL s or t button.
First, use the TV/CABLE and CH PROGRAM functions to preset all active channels in your area.
If necessary, arrange the preset channels with the ADD/ERASE functions so that you can tune into only desired channels.
Basic Operation
TV/CABLE function
MENU VOLUMECHANNEL | POWER | 1 Press POWER to turn on the TV. |
| ||
|
|
2 Press MENU (then s or t on Remote) repeatedly until “TV/CABLE” in the Set up menu is displayed in purple.
POWER
CHANNEL t/s
< / >
MENU
3Press T (<) or S (>) until the mode that corresponds to your TV signal system is displayed in purple.
TV: TV broadcasts signals.
|
|
| (VHF channels 2 through 13 and |
|
| POWER | UHF channels 14 through 69) |
TV/VIDEO |
| POWER | CABLE:Cable TV signals. |
|
| ||
1 | 2 | 3 | (Cable channels 1 through 125) |
|
|
| |
4 | 5 | 6 |
|
TV/CABLE: TVSCABLE CH PROGRAM ADD/ERASE:SADD ERASE
ESPANOL
MOVE[s t] SELECT[T S]
TV/CABLE: STV CABLE CH PROGRAM ADD/ERASE:SADD ERASE
ESPANOL
MOVE[s t] SELECT[T S]
Menu
T / S
MENU
7 8 9
1000 CH RTN
RECALL CH MUTE
VOL |
| VOL |
MENU | CH | EXIT |
Channel
Number CH PROGRAM function
1Press MENU (then s or t on Remote) repeatedly until “CH PROGRAM” in the Set up menu is displayed in purple.
CHANNEL s/t Menu s/t
2Press T (<) or S (>) to start channel pro- gramming. The TV will automatically cy- cle through all the TV or CABLE channels depending on the mode selected, and store active channels in the channel memory.
TV/CABLE: STV CABLE CH PROGRAM ADD/ERASE:SADD ERASE
ESPANOL
MOVE[s t] SELECT[T S]
CH PROGRAM
TV 15
3When channel programming is complete, you will see the message at the right.
COMPLETED
TV 4
4Press CHANNEL sor t to make sure the channel programming has been done properly.
8