Toshiba 19A24 manual To Memorize Channels, Adjusting the Picture

〈 0 – 9 / + / – / ENTER / MENU 〉

TO MEMORIZE CHANNELS

This TV is equipped with a channel memory feature that allows the				TO ADD/DELETE CHANNELS		￿￿	￿￿￿￿￿￿
TV to skip up or down to the next channel set into memory, skip-				1	Press MENU.		￿￿
ping over unwanted channels.
Before selecting channels, they must be programmed into the TV’s
				2	Press SET + or – until the indicator next to
memory. In addition to normal VHF and UHF channels, this TV can
					“CH SETUP” begins to flash, then press
receive up to 113 Cable TV channels. To use this TV with an
antenna, set the TV/CABLE menu option to the TV setting. When					ENTER.
shipped from the factory, this menu option is in the CABLE setting.						〈 ￿￿￿￿￿￿￿￿￿￿￿ ￿￿￿￿〉
TV/CABLE SELECTION			￿￿￿￿	3	Press SET + or – until the indicator
					next to “ADD/DELETE” begins to flash,		TV CABLE
1	Press MENU.				then press ENTER.		AUTO CH MEMORY
							ADD / DELETE
2	Press SET + or – until the indicator next to			4	Select the desired channels to be	〈 + / — / ENTER / MENU 〉
	“CH SETUP” begins to flash, then press		￿￿￿￿￿￿		added or deleted using the Direct
	ENTER.				Channel Selection buttons (0–9), CH +
					or –, SET + or –.
3	Press SET + or – until the indicator next		￿
		〈 ￿￿￿￿￿￿￿￿￿￿￿￿￿￿〉
	to “TV/CABLE” begins to flash.
			TV CABLE	5	Press ENTER to select ADD or DELETE.
4	Press ENTER to select the TV or CABLE		AUTO CH MEMORY		If an unmemorized channel was selected (step 4), the
	mode. The arrow indicates the selected		ADD / DELETE		channel indication will be red. Press ENTER if you wish
	mode.	〈 + / — / ENTER / MENU 〉			to ADD the unmemorized channel. The channel indica-
					tor will change from red to green when a channel is
5	Press MENU repeatedly until the menu				added and the channel will be memorized.
	screen is cleared.

ENGLISH

NOTE:

Contact your cable company to determine the type of cable system used in your area.

AUTOMATIC CHANNEL MEMORY	￿￿
1 Press MENU.

If a memorized channel was selected (step 4), the chan- nel indication will be green. To delete the channel from memory, press ENTER repeatedly until

“DEL” appears on-screen. The channel ADDCH 012 indicator will change from green to red

when a channel is deleted. Repeat steps 4 and 5 for each channel to be

2	Press SET + or – until the indicator next to
	“CH SETUP” begins to flash, then press
	ENTER.
3	Press SET + or – until the indicator next
	to “AUTO CH MEMORY” begins to flash,
	then press ENTER. The TV will begin
	memorizing all the channels available in
	your area. Channel numbers will remain
	red until auto memorizing is complete.

〈 ￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿〉

TV CABLE

AUTO CH MEMORY

ADD / DELETE

〈+ / — / ENTER / MENU 〉

6

added or deleted.

Press MENU repeatedly until the menu screen is cleared.

4 Press MENU repeatedly until the menu screen is cleared.

ADJUSTING THE PICTURE

You can adjust the settings for brightness, contrast, color, tint and sharpness.

1	Press MENU.
2	Press SET + or – until the indicator next to “PICTURE”
	begins to flash, then press ENTER.
3	Press ENTER repeatedly to select the item you want to
	adjust.

BRIGHTNESS CONTRAST COLOR TINT SHARPNESS

4 Press SET + or – to adjust the setting.

	+	–
BRIGHTNESS	higher	lower
CONTRAST	lighter	darker
COLOR	deeper	paler
TINT	greenish	reddish
SHARPNESS	sharper	softer

TO RETURN TO INITIAL SETTING:

Press RESET while the picture adjusting mode appears on-screen.

9

3M21501A-E P08-12 9 13/2/04, 2:15