Toshiba 13A26C, 19A26C manual To Memorize Channels, Adjusting the Picture, To ADD/DELETE Channels

〈 0 – 9 / + / – / ENTER / MENU 〉

TO MEMORIZE CHANNELS
						￿￿
This TV is equipped with a channel memory feature that allows the				TO ADD/DELETE CHANNELS			￿￿￿￿
TV to skip up or down to the next channel in the TV’s memory,				1	Press MENU.		￿￿￿￿￿	￿￿￿
skipping over unwanted channels.
Before selecting channels, you must program them into the TV’s				2	Press SET + or – until the indicator next to
memory. In addition to normal VHF and UHF channels, this TV can
receive up to 113 Cable TV channels. To use this TV with an					“CH SETUP” begins to flash, then press
antenna, set the TV/CABLE menu option to the TV setting. When					ENTER.
shipped from the factory, this menu option is in the CABLE setting.						〈 ￿￿￿￿￿￿￿￿￿￿￿￿￿￿〉
TV/CABLE SELECTION		￿￿		3	Press SET + or – until the indicator
			￿￿￿		next to “ADD/DELETE” begins to		TV CABLE
1	Press MENU.				flash, then press ENTER.		AUTO CH MEMORY
							ADD / DELETE
2	Press SET + or – until the indicator next to			4	Select the desired channels to be
						〈 + / – / ENTER / MENU 〉
	“CH SETUP” begins to flash, then press				added or deleted using the Direct
	ENTER.		￿￿￿￿￿￿￿￿￿		Channel Selection buttons (0–9),
	Press SET + or – until the indicator next				CH + or –,SET + or –.
3		〈 ￿￿￿￿￿￿￿￿￿￿￿￿￿￿〉
	to “TV/CABLE” begins to flash.
			TV CABLE	5	Press ENTER to select ADD or DELETE.
4	Press ENTER to select the TV or CABLE		AUTO CH MEMORY		If an unmemorized channel was selected (step 4), the
	mode. The arrow indicates the selected		ADD / DELETE		channel indication will be red. Press ENTER if you wish
	mode.	〈 + / – / ENTER / MENU 〉			to ADD the unmemorized channel. The channel
					indicator will change from red to green when a channel
5	Repeatedly press MENU until the				is added and the channel will be memorized.
	menu screen closes.

NOTE:
Contact your cable company to determine the type of cable
system used in your area.		￿￿	￿￿￿￿￿
AUTOMATIC CHANNEL MEMORY
			￿￿￿￿
1	Press MENU.
	Press SET + or – until the indicator next to
2
	“CH SETUP” begins to flash, then press
	ENTER.
		〈 ￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿〉
3	Press SET + or – until the indicator next
	to “AUTO CH MEMORY” begins to flash,		TV CABLE
	then press ENTER. The TV will begin		AUTO CH MEMORY
	memorizing all the channels available in		ADD / DELETE
	your area. Channel numbers will remain	〈 + / – / ENTER / MENU 〉
	red until auto memorizing is complete.

If a memorized channel was selected (step 4), the channel indication will be green. To delete the channel from memory, press ENTER repeatedly

until “DEL” appears on-screen. The ADDCH 012 channel indicator will change from

green to red when a channel is deleted. Repeat steps 4 and 5 for each channel to be added or deleted.

6 Repeatedly press MENU until the menu screen closes.

4

Repeatedly press MENU until the menu screen closes.

ADJUSTING THE PICTURE

You can adjust the settings for brightness, contrast, color, tint and sharpness.

1	Press MENU.
2	Press SET + or – until the indicator next to “PICTURE”
	begins to flash, then press ENTER.
3	Repeatedly press ENTER to select the item you want to
	adjust.

BRIGHTNESS CONTRAST COLOR TINT SHARPNESS

4 Press SET + or – to adjust the setting.

	+	–
BRIGHTNESS	higher	lower
CONTRAST	lighter	darker
COLOR	deeper	paler
TINT	greenish	reddish
SHARPNESS	sharper	softer

TO RETURN TO FACTORY SETTINGS:

Press RESET while the picture adjusting mode is on-screen.

9

3X00221A(E)_P08-12 9 22/12/05, 4:41 PM