Toshiba 20A42 To Memorize Channels, Adjusting Picture, TV/CABLE Selection To ADD/DELETE Channels

〈 0 – 9 / + / – / ENTER / MENU 〉

TO MEMORIZE CHANNELS

This TV is equipped with a channel memory feature that allows the TV to skip up or down to the next channel set into memory, skip- ping over unwanted channels.

4 Press MENU repeatedly until the MENU screen is cleared.

Before selecting channels, they must be programmed into the TV's memory. In addition to normal VHF and UHF channels, this TV can receive up to 113 Cable TV channels. To use this TV with an antenna, set the TV/CABLE menu option to the TV setting. When shipped from the factory, this menu option is in the CABLE setting.

TV/CABLE SELECTION

TO ADD/DELETE CHANNELS

1	Press MENU.
2	Press SET + or – until the indicator next to
	"CH SET" begins to flash, then press
	ENTER.

MENU

CH SET

PICTURE

AUDIO

TVLANGUAGE -CHIP SET

1	Press MENU.
2	Press SET + or – until the indicator next to
	"CH SET" begins to flash, then press
	ENTER.

MENU

CH SET PICTURE AUDIO LANGUAGE

3 Press SET + or – until the indicator

next to "ADD/DELETE" begins to

flash, then press ENTER.

LOCK

〈 + / – / ENTER / MENU 〉

·+/–A/ENTERDDUTO/DELETECABLEH/MENUMMORYÒ

3	Press SET + or – until the indicator next
	to "TV/CABLE" begins to flash.
4	Press ENTER to select the TV or CABLE
	mode. The arrow indicates the selected
	mode.
5	Press MENU repeatedly until the
	MENU screen is cleared.

AUTO-CHIPDELETEHSETMMORY

TVCABLE

LOCK

·〈++//–/– /ENTERENTERDD///MENUMENUÒ〉

4 Select the desired channels to be added or deleted using the Direct Channel Selection buttons (0-9), CH + or – or SET + or –.

5 Press ENTER to select ADD or DELETE.

If an unmemorized channel was selected (step 4), the channel indication will be red. Press ENTER if you wish to ADD the unmemorized channel. The channel indica-

NOTE:

Contact your cable company to determine the type of cable system used in your area.

tor will change from red to green when a channel is added and the channel will be memorized.

AUTOMATIC CHANNEL MEMORY

1	Press MENU.
2	Press SET + or – until the indicator next to
	"CH SET" begins to flash, then press
	ENTER.
3	Press SET + or – until the indicator next
	to "AUTO CH MEMORY" begins to flash,
	then press ENTER. The TV will begin
	memorizing all the channels available in
	your area. Channel numbers will remain
	red until auto memorizing is complete.

MENU

CH SET

PICTURE

TVAUDIO

LANGUAGE

-CHIP SET

LOCK

〈 + / – / ENTER / MENU 〉

·+/–A/ENTERDDUTO/DELETCABLEH/MENUMMORYEÒ

If a memorized channel was selected (step 4), the chan- nel indication will be green. Press ENTER if you wish to DELETE the channel from memory.

The channel indicator will change from ADDCH 012 green to red when a channel is de-

leted. Repeat Steps 4 and 5 for each channel to be added or deleted.

6 Press MENU repeatedly until the MENU screen is cleared.

ADJUSTING PICTURE

You can adjust the settings for color, sharpness, contrast, brightness and tint.

1	Press MENU.
2	Press SET + or – until the indicator next to "PICTURE"
	begins to flash, then press ENTER.
3	Press ENTER repeatedly to select the item you want to
	adjust.

BRIGHTNESS CONTRAST COLOR TINT SHARPNESS

4 Press SET + or – button to adjust the setting.

	+	–
BRIGHTNESS	increase brightness	decrease brightness
CONTRAST	increase contrast	decrease contrast
COLOR	brilliant color	pale color
TINT	greenish color	reddish color
SHARPNESS	makes picture clearer	makes picture softer

TO RETURN TO INITIAL SETTING

Press RESET while the picture adjusting mode appears on-screen.

9

3L70101A-E P.08-13 9 5/6/02, 11:34 AM