Toshiba 19LV611U VCD Basic playback, To obtain a higher quality picture, To stop playback

Basic playback

Playing a disc (Continued)

To obtain a higher quality picture

Occasionally, some picture noise may appear on the TV screen while playing a DVD video disc because the high resolution pictures on these discs include a lot of information. In such case, you may reduce the Sharpness with the Picture Setting menu (see page 37 ).

About DVD VCD CD

EJECT POWER

The	DVD VCD CD icons on the heading bar show the playable discs for the		PLAY
function described under that heading.			STOP
	: You can use this function with DVD video discs.
			PAUSE
VCD	: You can use this function with Video CDs.
CD	: You can use this function with Audio CDs and CD-R/RW CDs.
DVD
VCD Basic playback (continued)
CD
To pause playback (still mode)		To remove the disc
Press PAUSE during playback.		Press EJECT.
	To resume normal playback,	Remove the disc after the disc comes
	press PLAY.	out.

• The sound is muted during still mode.

To stop playback

Press STOP.

Note:

•If a non-compatible disc is loaded, “Incorrect Disc”, “Region Code Error” or “Parental Error” will appear on the TV screen

according to the type of loaded disc. In this case, check your disc again 8 67 .

•Some discs may take a minute or so to start playback.

•When you set a single-faced disc label downwards (ie. the wrong way up), “Reading” will appear on the display for a few minutes and then “Incorrect Disc” will continue to be displayed.

•Some discs may not work the resuming facility.

•Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. To turn off the PBC, see page 56 .

•Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs according to the disc contents the software producers designed, some playback features may not be available. Also refer to the instructions supplied with the DVDs.

•Do not move the unit during playback. Doing so may damage the disc.

•Use the EJECT to unload and eject the disc.

•Do not put any objects other than discs on the disc slot. Doing so may cause the unit to malfunctions.

•In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press POWER on the remote control once the movie is completed.

•There may be a slight delay between the button is pressed and the function activates.

48

52G0101A P47-49.indd 48

1/5/09 3:05:41 PM