Toshiba 27DF46 appendix Adding channels to the TV’s memory, Programming channels automatically

Setting up your TV

Adding channels to the TV’s memory

When you press Channel ▲ / ▼ on the TV or CH 3 / 4 on the remote control, your TV will stop only on the channels you have programmed into the TV's channel memory. Follow the steps below to program channels into the channel memory.

Programming channels automatically

Your TV can automatically detect all active channels and store them in its memory. After the TV has stored the channels in its memory auto- matically, you can add or erase channels manually.

To add channels automatically:

1.	Press MENU, then press or	to display the SETUP menu.
2.	Press ▲ or ▼ until the TV/CABLE
	selection is highlighted.
3.	Press or to highlight either		SETUP
			LANGUAGE		ENGLISH
	TV or CABLE, depending on
			CLOCK SET
	which you use.		TV / CABLE		TV /	CABLE
			CH PROGRAM
			ADD / ERASE
	If you use an antenna, choose TV.			:SELECT	:ADJUST
	If you use cable, choose CABLE.

4.Press ▼ until the CH PROGRAM selection is highlighted.

5.Press or to start channel programming. The TV will automatically cycle through all the TV or Cable channels (depending on which you selected), and store all active channels in the channel memory. While the TV is cycling through the channels, the message “PROGRAMMING NOW-PLEASE WAIT” appears.

6.When channel programming is complete, the message “COMPLETED” appears.

7.Press CH 3 or 4 to view the programmed channels.

Adding and erasing channels manually

After you have programmed the channels automatically, you can add or erase specific channels manually.

To add or erase channels manually:

1.Press MENU, then press or to display the SETUP menu.

2.Press ▲ or ▼ until the ADD/ERASE selection is highlighted.

3.	Press	or	to display the ADD/
	ERASE menu.
4.	Press ▲ or ▼ to select ADD/ERASE,			S E T U P
	then press .			L A N G U A G E		ENGLISH
				CLOCK SET
5.	Select the desired channel to be			TV / CABLE		CABLE
				CH PROGRAM
				ADD / ERASE
	memorized or deleted using ▲ or ▼.
	Press	or	to select either ADD or		:SELECT		:ADJUST

ERASE.

6.Repeat step 5 for other channels you want to add or erase, then press ENTER.

7.Press EXIT to return to the normal screen.

To erase all channels from the channel memory:

Press ▲ or ▼ to select CLEAR ALL in step 4 above, then press ENTER. All channels are erased from the channel memory. (You can still use the Channel Numbers on the remote control to tune a channel.)

Changing channels

To change to the next programmed channel:

Press Channel ▲ / ▼ on the TV or CH 3 / 4 on the remote control.

To change to a specific analog channel:

Press the Channel Number buttons (0-9) on the remote control. For example, to select channel 125, press 1, 2, 5.

To change to a specific digital channel:

Press the first 3 digits, then press 100, followed by the remaining 3 digits. For example, to select channel 015-001, press 0, 1, 5, 100, 0, 0, 1.

20

Note:

If the desired channel is not stored in the channel memory, add the channel manually (see “Adding and erasing channels manually,” below).

Channel

Numbers

Channel 3 4

Menu

Exit

Note:

Digital cable channels may be represented by channel numbers that include a “dash” (e.g., 85–002). These digital channel numbers may not match the numbers in the channel line-up provided by your cable company. This is not a malfunction.

J3W20521A(E)_P14-21 20 14/03/2006, 2:14 PM