Toshiba 30WL46, 27WL46 manual Automatic Size, Color Temperature, Zoom, Special Features Timer

ingilizce-2.FH11 6/7/05 12:14 PM Page 2

Features

Automatic Size

Some channels broadcast with the program also size information. If you choose Open for the Automatic Size feature the TV will adjust to the size information broadcasted. To detect

Automatic Size, the screen setting needs to be at Auto Mode. Your television is in the picture format of 16:9. However, for the programs that do not send automatic format information, you can change the format of the program you watch with

the () button on the RC.

Blue Screen: If you chose this feature to be On, you will see a blue screen instead of static on channels without broadcasting.

Color Tint

When NTSC video is used in SCART, Color Tint settings can be made. If you do not use such a video type the Color Tint choice is seen in the menu, but Up/down ( – / + ) buttons cannot be

used to select it. If NTSC video is used in SCART this choice becomes active and can be changed.

DNR: This feature improves noise on picture with three levels. Dynamic Noise Reduction can be selected with 4 settings; Off- Soft- Sharp- Sharpest If "Off" item is seleceted, no noise reduction is applied on picture.

Black Strech: Black Stretch enhances the contrast of the picture. The dark regions of the picture are made darker, while bright areas remain unchanged.

Luminance Peaking: The Luminance Peaking improves the overall frequency response of the luminance. It creates blacker blacks and whiter whites.

Color Temperature

To adjust the color temperature while watching TV select this feature and use the right/left ( – / + ) button to select Normal, Tepid or Cool. Changes are stored without any further action.

Zoom

In the picture menu select the Zoom selection and press OK to enter this menu. When you enter this menu you will see in the lower right corner of the screen the Zoom sub-menu. Using the

Up/down ( – /+ ) buttons you can enlarge or shrink the image in 20 steps. During the Zoom process the image will be enlarge focused on the center. In this case if you want to move the image up/down or right/left press the OK button on your remote. Later use the directional buttons to move around. If you want to exit the Zoom menu at any time press the MENU button.

Special Features Timer

Select the Timer bar in the menu and press “OK” or ( – ) button. The Timer menu will be on screen. This function will enable you to open and close your

television automatically.

Select the Switch-off Time and press the OK button. The changeable number will appear grey. Enter the hour and minute for which you can set 12 hours 59 min. at most using the numerical buttons on the RC. Your TV will automatically switch to standby at the end of this period. In the event that you wish to exit the application at any given stage, simply press the MENU button. On Timer: Select the Switch-on Time and press the OK button. The changeable number will appear grey. Enter the hour and minute for which you can set 12 hours 59 min. at most using the numerical buttons on the RC. Your TV will be turned on with the program automatically selected on standby at the end of this period.

TIMER

Off timer

On timer

On timer Position

Back Watch TV

ENGLISH -18-