FIELD REPLACEABLE UNIT DOCUMENTATION
TM
Satellite
3000 Series
KEYBOARD REMOVAL
| Wireless switch |
| Control board cable |
Display |
|
panel | JP1 |
|
Board
switch
Keyboard holder
Case separator
1.Open the display panel.
2.Using the case separator, unlatch the keyboard holder at the top of the keyboard.
M2.5x3 silver screws | Keyboard holder |
3.Disconnect the control switch/LED board cable from the keyboard holder.
4.Remove four M2.5x3 silver screws securing the
keyboard clip.
Note: When reinstalling the keyboard holder, make sure that the wireless switch is latch properly to the control switch board switch.
KEYBOARD REMOVAL | CONTROL BOARD REMOVAL | ||
|
|
|
|
Control switch
board
Keyboard
IPS switch cable
Keyboard cable | JP5 | JP4 |
4. Lift out the keyboard and set it as shown above.
5Disconnect the keyboard cable from JP5 and IPS switch cable from JP4 on the video board and lift out the keyboard.
M2.5x3 black screws
1.Remove four M2.5x3 black screws securing the control switch board.
2.Disconnect the control switch/LED board from JP4 on the main PCB.
TOSHIBA
Tough Enough for Today’s World
