Toshiba 32A33 Connecting your TV

Connecting your TV

Note: Cables are not supplied with your TV.

￿Coaxial cable is the cable that comes in from your antenna, cable TV service, or cable converter box. Coaxial cable uses “F” connectors.

￿Standard stereo A/V cables usually come in sets of three, and are typically color-coded according to use: yellow for video, red for stereo right audio, and white for stereo left (or mono) audio. Your TV’s standard A/V inputs are color-coded in the same manner as the cables.

￿S-Video cable is for use with video equipment that has S-Video connectors.

￿Component video cables come in sets of three (typically color-coded green, blue, and red), and are for use with video equipment that has component video connectors. Your TV’s ColorStream® (component video) inputs are color-coded yellow, blue, and red. Plug the green component video cable into the yellow VIDEO-2 input (see “Back of TV” on page 6).

NOTE REGARDING PICTURE QUALITY

When connecting video equipment to your Toshiba TV:

￿For GOOD picture quality: Use a standard yellow video cable.

￿For BETTER picture quality: If your equipment has S-video connectors, use an S-video cable instead of a standard yellow video cable. You still must connect the standard red and white audio cables for full system connection, but do not connect a standard yellow video cable at the same time or the picture performance will be unacceptable.

￿For BEST picture quality: If your equipment has component video connectors, use component video cables instead of a standard yellow video cable or S-video cable. You still must connect the standard red and white audio cables for full system connection.

Coaxial (antenna) cable

Standard stereo A/V cables

(typically color-coded yellow for video, red and white for audio)

S-video cable

Component video cables

(typically color-coded red, green, blue)

CAUTION: Do not plug in any power cords until you have finished connecting all equipment.

Connecting Introduction TV oury

the Using Control Remote

Connecting a VCR

With this connection you can:

•watch local TV channels and videotapes

•record one channel while watching the same or another channel

You will need:

•two coaxial cables

•one set of standard A/V cables (If your VCR has S-video, you can use an S-video cable instead of the standard video cable. See “Note Regarding Picture Quality” above.)

Note:

If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable.

The VIDEO-2 inputs on the back of the TV can be used for connecting a second piece of video equipment such as a DVD player. The VIDEO-3 inputs* on the front of the TV can be used for connecting a third piece of video equipment such as a

camcorder. See “Note Regarding Picture Quality” above.

________

*Model 32A33 does not have VIDEO 3 inputs.

From cable or antenna

Stereo VCR

S-VIDEO VIDEO	L OUT R
	IN	IN from ANT OUT to TV
		CH3
	OUT	CH4

TV

IN			OUT
		COLOR	ANT
VIDEO	VIDEO STREAM		VIDEO
		INPUT
L/	Y		L/
	L
MONO			MONO
AUDIO	AUDIO PB		AUDIO
R	R	PR	R
VIDEO-1	VIDEO-2

Connecting a cable converter box

With this connection you can:

• watch basic and premium cable channels

Tune the TV to channel 3 or 4 (whichever channel is vacant in your area), and then use the cable converter box to change channels.

You will need:

• two coaxial cables

Note:

When you use a cable converter box with your TV, you may not be able to use the remote control to program certain features (for example, blocking channels).

From cable

		TV			OUT
IN	OUT	IN
				COLOR	ANT
		VIDEO	VIDEO STREAM		VIDEO
				INPUT
		L/	Y		L/
Cable converter			L
		MONO			MONO
		S-VIDEO
box
		AUDIO	AUDIO PB		AUDIO
		R	R	PR	R
		VIDEO-1	VIDEO-2

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

up Setting TV oury

TV’s the Using eaturesF

Appendix

7