Setting up your TV
The IMAGE SHAPE feature allows you to adjust the shape of the image when viewing 16:9 (widescreen) content from an external device (for example, a DVD player). This feature enables you to watch 16:9 content in the highest possible resolution (when you select “16:9” mode in step 2, below). See “Notice of possible adverse effects on TV picture tube,” below right.
To adjust the image shape:
1.Press PIC SIZE on the remote control. The SET UP menu opens and IMAGE SHAPE is highlighted.
Note: You also can use the menu system to adjust the IMAGE SHAPE. Press MENU and then x or • to open the SET UP menu. Press
y or z to highlight IMAGE SHAPE. Then go to step 2.
SET UP
MORE
DEMO: | START [STOP] |
IMAGE TILT | +3 |
IMAGE SHAPE:
[NORMAL] 16:9
MOVE [ | ] SELECT [ | ] |
2.Press x or • to select NORMAL or 16:9 mode, as described below.
•
To use the NORMAL IMAGE SHAPE mode, you must first adjust your DVD player’s menu settings to normal/conventional TV mode (4:3 aspect ratio).
•
To use the 16:9 IMAGE SHAPE mode, you must first adjust your DVD player’s menu settings to widescreen TV mode (16:9 aspect ratio).
The 16:9 IMAGE SHAPE mode is not available when viewing an antenna signal source.
PIC SIZE
MENU
yzx •
Note:
•The factory (default) setting for the IMAGE SHAPE feature is “NORMAL.”
•Aspect ratio is the ratio of width to height of your TV screen or of the image you are viewing.
NOTICE OF POSSIBLE ADVERSE EFFECTS ON TV PICTURE TUBE
Avoid displaying stationary images on your TV screen for extended periods of time. Fixed
22