Toshiba 32AF43, 36AF43 17

Using the remote control to operate a cable converter box, satellite receiver, VCR, DVD player, or HTIB (home theater in a box)

If you have a non-Toshiba device or a Toshiba device that the remote control is not preprogrammed to operate, you must first program the remote control to recognize the device (if you have not already done so). See pages 15–16.

To use your TV remote control to operate a:

•cable converter box or satellite receiver, set the Device Switch to CBL/SAT.

•VCR, set the Device Switch to VCR.

•DVD player or HTIB, set the Device Switch to DVD.

Introduction

y Connecting ourTV

Note:

•Even after the TV remote control is programmed, it may not operate certain features on your other device. If this happens and you wish to use those features, you will need to use the device’s original remote control.

•This illustration describes typical external device functions (not TV functions). The buttons on this remote control may or may not work as described for your specific device.

Point the remote control

directly at the device.

RECALL

DVD DISPLAY function.

POWER

Turns the selected device on and off.

the UsingControl Remote

+10 / 100 Accesses DVD chapters higher than 10, or VCR channels higher than 100.

TOP MENU (SLEEP)

Accesses a DVD’s top menu.

DVD MENU

Accesses a DVD’s menu system.

ENTER

DVD ENTER function.

Device Switch

Set to TV to control the TV; CBL/SAT to control a cable converter box or satellite receiver; VCR to control a VCR; DVD to control a DVD player or HTIB.

TV/VCR

To view one program while recording another, press to select TV mode.

REW Rewinds the tape or DVD. (Press during playback to view the picture moving rapidly backward.)

REC

Starts recording.

FF Fast-forwards the tape or DVD. (Press during playback to view the picture moving rapidly forward.)

}