Toshiba 32FT2U owner manual Setting the PC Audio, Using the Media Player with USB

Chapter 6: Using the TV’s features

Setting the PC Audio

This function allows you to output or mute the sound from your PC when connecting using the PC IN terminal and an analog RGB cable. ( page 18)

To set the PC Audio:

1無 Press and open the Sound menu.

2無 Highlight Audio Setup and press .

3無 Press  or  to select PC Audio and then press

or  to select No or Yes.

Yes: When viewing the PC input, the audio from the PC Audio input can be heard.

No: When viewing the PC input, there will be no audio.

Note: Because the PC and HDMI-1 inputs share the same set of analog audio inputs, the PC Audio menu setting influences the HDMI 1 Audio menu setting. If PC Audio is set to “No” the HDMI 1 Audio setting changes to “Auto” If PC Audio is set to “Yes” the HDMI 1 Audio setting is set to “Digital” and is grayed out in the menu. (Also see item 3 on page 12 and “Setting the HDMI® Audio mode” on page 26.)

Using the Media Player

Using the Media Player with USB

You can enjoy photos or music contents stored on a USB storage device.

Photo Viewer specifications:

Data type: JPEG Exif ver2.1

File format: JPEG

Maximum photo size: 6 MB

Maximum number of files: 500 / folder

Maximum photo resolution: 1920 x 1080 pixels

Music Player specifications:

File format: MP3

Sampling frequency: 16 kHz, 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz

Bit rate: from 8 to 320 kbps

Maximum number of files: 500 / folder

Supported file system:

FAT16 and FAT32

Note:

••Gently insert the USB device into the port and do not remove while using the Media Player.

••USB device: USB Mass Storage Class device (MSC)

••Support is not guaranteed for all devices.

••Connect the USB device directly to the TV.

••Do not use a USB Hub.

••You must obtain any required permission from copyright owners to use copyrighted content. Toshiba cannot and does not grant such permission.

••Depending on the file size and amount in your USB storage device, it may take some time to load before content is viewable. A message will display on-screen when loading files from the USB storage device.

••Only limited types of U3 USB devices are supported. Therefore, it is suggested you do not use U3 USB for the Media Player function.

••Non-supported characters in the filename will be replaced with a square().

To select the Auto Start function

1無 Press and  or  to select the Setup menu. 2無 Press  to select Media Player, and then press .

3無 Press  or  to select Auto Start. 4無 Press  or  to select On or Off.

To open the Media Player

There are two methods for starting the Media Player.

Automatically:

1無 Gently insert a supported USB storage device to the USB port on the rear side of the TV. A prompt will appear.

Note: If you repeatedly insert and remove the USB device, the prompt may not appear.

2無 Press  or  to select Yes, and then press , the Media Player menu will appear. When you select No, nothing happens.

Note:

••The prompt will disappear after about 10 sec.

••If Auto Start is set to Off, you can start the Media Player manually.

(continued)

43