Using the TV’s Features
Saving new preference
You can save the PICTURE qualities (contrast, brightness, color, tint, and sharpness) you adjusted in the picture preference mode.
To save your new preferences:
1. Press MENU, and then press x or • until the PICTURE menu appears.
2. Press y or z to highlight SAVE NEW PREFERENCE.
3. Press x or •. When complete, the menu displays “DONE.”
MENU
P I CTURE ANTENNA
MODE |
| PREFERENCE |
|
FLESH TONE | OFF | yzx • | |
| |||
CableClear | DNR | OFF |
|
SVM |
| H I GH |
|
COLOR |
| MEDI UM |
|
TEMPERATURE |
| ||
SAVE NEW | PREFERENCE | DONE |
The mode automatically change to PREFERENCE (see “Selecting the picture mode” on page 41).
You can choose your saved preferences any time by selecting PREFERENCE in the PICUTRE menu (see “Selecting the picture mode” on page 41).
Using the flesh tone feature
This feature displays natural flesh tones by correcting the tint.
To turn on the flesh tone feature:
1.Press MENU, and then press x or • until the PICTURE menu appears.
2.Press y or z to highlight FLESH TONE.
3.Press x or • to highlight ON.
P I CTURE ANTENNA
MODEPREFERENCE
FLESH TONE | ON / OFF | |
CableClear | DNR | OFF |
SVM |
| H I GH |
COLOR |
| MEDI UM |
TEMPERATURE | ||
SAVE NEW | PREFERENCE |
Using the CableClear™ DNR (digital noise reduction) feature
This feature allows you to reduce visible interference in your TV picture. This is useful when receiving a broadcast with a weak signal (especially Cable channel) or playing back a video cassette or disc damaged by repeated use.
To turn on the CableClear™ DNR feature:
1.Press MENU, and then press x or • until the PICTURE menu appears.
Note:
2.Press y or z to highlight CableClear DNR.
3.Press x or • to highlight AUTO.
To turn off the CableClear DNR™ feature:
Highlight OFF in step 3 above.
P I CTURE ANTENNA
MODEPREFERENCE
FLESH TONE | ON | |
CableClear | DNR | AUTO / OFF |
SVM |
| H I GH |
COLOR |
| MEDI UM |
TEMPERATURE | ||
SAVE NEW | PREFERENCE |
The “CableClear DNR” display will change to “DNR” in video mode.
42