Toshiba 32HFX72 Connecting a DVD player or satellite receiver and a VCR

Connecting a DVD player or satellite receiver and a VCR

This connection allows you to watch DVD/satellite, VCR, and TV programs, and record one TV channel while watching another channel.

You will need:

•two (or three, if satellite receiver is used) coaxial cables (one or more may be provided by your cable or satellite company)

•one set of standard A/V cables

•one pair of audio cables

•one S-video cable (between the TV and DVD player/satellite receiver)

From Antenna

Stereo VCR

L R

Note:

For the highest possible picture quality from a DVD player/satellite receiver without component video, use an S-video cable between the TV and DVD player/satellite receiver. (If your DVD player or satellite receiver is component video-compatible, see page 10).

Do not connect both an S-video cable and a standard video cable between the TV and DVD player/satellite receiver at the same time, or the picture performance will be unacceptable.

Do not connect the DVD player/satellite receiver and VCR to the same video channel on the TV. (See the illustrations, which show

Introduction
Connecting	yourTV
	Control

IN from ANT OUT to TV

CH 3

IN

the DVD player/satellite receiver connected to Video-1 on the TV, and the VCR connected to

the

CH 4

OUT

Video-2 on the TV.)

Using Remote

TV

				ANT(75	)
From Satellite Dish
I N			ANT-1	OUT	ANT-2
	I N			OUT
		COLOR
VIDEO	Y	STREAM	Y	VIDEO
- 1		HD - 2
	PB		PB	L/
		L		MONO	AUDIO CENTER
AUDIO
					CHANNEL IN
	PR	AUDIO	PR	AUDIO	L
VIDEO-1 VIDEO-2 R		R			ON OFF
				R	R

DVD Player/Satellite receiver

AUDIO

OUT

L

IN from ANT

R

S-VIDEO VIDEO

OUT OUT

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

Settingup	yourTV
UsingtheTV’s	Features
Appendix
Index

9