13
Getting started
Tuning the TV for the first time
- digital only -
Before switching on the TV, put your decoder and media
recorder to Standby if they are connected and ensure the
antenna is connected. To setup the TV use the buttons on the
remote control as detailed on page 10.
1Press , the Welcome screen will appear. This
screen will appear the first time that the TV is switched on
and each time the TV is reset.
2PressQ to proceed.
3The Select Location screen will appear. Press u or U
to select the state in which you live.
4PressQ to start tuning. The Auto Scan screen will
appear and the TV will automatically start to search for
available stations. The progress bar will move along the
line.
5When the search is completed, the TV will automatically
turn to the lowest logical channel number. See the
following for more details on Auto Scan.
Note:
If you do not live in Australia, press P at the Select Location.
Press M, then press I or i to select PROFILE.
Press u or U to select Time Zone to set your time zone
(- page 24).
Then use Manual Scan to start tuning (- page 14).
Programming channels into the TV’s channel memory
Auto scan - digital only -
As new services are broadcast, it will be necessary to re-tune
the TV in order to view them.
Auto scan will completely re-tune the TV and can be used to
update the channel list. It is recommended that Auto scan is run
periodically to ensure that all new services are added. All
stored programs and settings, including Timer entries,
favorites and locked programs, will be lost.
1Press M and I or i to select the SCAN menu.
2Useu to select Auto Scan.
3Press Q to display Password. Enter your password
(- page 29) using the number buttons or press 0000
(which is the default password).
4The Select Location will appear. Current location will
be highlighted. Press u or U to select a state in which you
live.
5Press ,
Qa confirmation screen will appear indicating
that All existing channels will be deleted.
Continue? select Yes.
6Press Q to start Auto tuning.
The above sample display shows Auto Scan in progress.
The channel number is shown as “06-0007” etc., where
“06” is the physical channel number and “0007” is the
logical channel number (which is the 4-digit number you
enter when changing channels).
7When the search is complete, the TV will automatically
tune to the lowest logical channel number.
Thank you for choosing TOSHIBA television.
First you need to tune in your television.
Please ensure aerial is connected before proceeding.
Press to continue.
Select Location
Australian Capital Territory
New South Wales
Northern Territory
Queensland
South Australia
Tasmania
Victoria
Western Australia
Back Watch TV
MENU EXIT
Select Function
Auto Scan
7 Digital
7 Digital HD
7 Digital 1
7 Digital 2
Channel 6 found...
06-0007
06-0070
06-0071
06-0072
7 Digital 3
06-0073
7 Digital Guide
06-0077
Scan Status 6/69
Scan Percentage
Northern Territory
Back Watch TVSelect Function
Password
Watch TV
Blocking active
Enter PIN code
To temporarily unblock
Back
Auto Scan
7 Digital
7 Digital HD
7 Digital 1
7 Digital 2
Channel 6 found...
06-0007
06-0070
06-0071
06-0072
7 Digital 3
06-0073
7 Digital Guide
06-0077
Scan Status 6/69
Scan Percentage
Back Watch TVSelect Function
Northern Territory