Introduction

 

 

 

Connecting

yourTV

 

 

Usingthe

RemoteControl

Settingup

yourTV

UsingtheTV’s

Features

Appendix

 

Index

 

Connecting a VCR

This connection allows you to watch local channels and video programs, play or record on the VCR while watching TV, and record from one channel while watching another channel.

You will need:

two coaxial cables

one set of A/V cables

From Cable Box or Antenna

Stereo VCR

IN

IN from ANT OUT to TV

CH 3

 

 

OUT

 

 

 

CH 4

VIDEO

L

R

 

 

 

AUDIO

TV

Connecting a cable converter box

This connection allows you to watch basic and premium cable channels.

To watch basic cable and use the TV’s features, select ANT-1. To view premium channels, select ANT-2, tune the TV to channel 3 or 4 (whichever channel is vacant in your area), and use the converter box to change channels.

You will need:

• three coaxial cables

From Cable

TV

OUT IN

Cable converter box

Note:

If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable.

If you have a VCR with S-video, use an S- video cable (in the S-video jacks) instead of the standard video cable.

Do not connect a standard video cable and an S-video cable to Video-1 (or Video-2) at the same time, or the picture performance will be unacceptable.

The unauthorized recording, use, distribution, or revision of television programs, videot apes, DVDs, and other materials is prohibited under the Copyright L aws of the United St ates and other countrie s, and may subject you to civil and criminal liability.

Note:

When you use a converter box with your TV, the remote control will not operate some features, such as programming your favorite channels, labeling channels, and locking channels.

8

Page 8
Image 8
Toshiba 34HF84 owner manual Connecting a VCR, Connecting a cable converter box, From Cable Box or Antenna Stereo VCR