65
HL167 (E/F) Web 213:276
Chapter 6: Using the TV’s features
–POWER turns the device on and off.
–Contents Menu accesses the contents list when you
press T. At this time, the CE-Link Player Control
menu will disappear.
Note:
•These functions depend on the devices that are connected.
•The CE-Link Player Control item will be grayed out in the
following conditions:
-A non-HDMI input is currently selected.
-The Enable CE-Link item is set to Off.
-The connected device is not a playback or recording
device.
VOLUME and MUTE controls of Audio Receiver
With your TV’s remote control, you can adjust or mute the
sound volume of the Audio Receiver’s speakers connected to
the TV. First, select TV mode by pressing MODE SELECT on
the remote control.
•z Z adjust the volume level.
•W turns off the sound.
Note:
•To use this function:
-Set Speakers preference to Audio Receiver in the
CE-Link Setup menu.
-Confirm that a connected CE-Link device (such as HD
DVD player, etc) is selected for the Audio Receiver input
source.
•You can also use this function when the audio receiver is
connected to the TV’s DIGITAL AUDIO OUT terminal (not
HDMI connection). In this case, select a digital audio input
mode on the Audio Receiver.
•These functions depend on the device connected.
Other CE-Link functions
When the Enable CE-Link and each item in the CE-Link
Setup menu are set to On, the following functions will be
enabled.
•TV Auto Input Switch
If a connected HDMI device starts playing video or audio,
the TV will automatically switch to the appropriate HDMI
input.
•TV Auto Power
If a CE-Link device is turned on or off, the TV turns on or
off automatically.
•Device Auto Standby
If the TV is turned off the TV will send a message to turn off
all of the CE-Link devices connected to the TV.
•Speaker Preference
From this item, you can set your audio output preference to
the TV speakers or the audio receiver speakers. When this
item is set to Audio Receiver, the TV remote can be used to
adjust or mute the volume of the audio. This item will be
grayed out unless a CE-Link compatible audio receiver is
connected.
Note: When you turn on the Audio Receiver, change its input
source, or adjust the sound volume, the sound will be output
from the audio receiver’s speakers even if the TV Speakers
has been selected. Turn the TV off and on again to output the
sound from the TV Speakers.

To set the CE-Link Setup:

1Press Y and open the Setup menu.
2Highlight CE-Link Setup and press T.
3Press B or b to highlight Enable CE-Link.
4Press C or c to select On.
Note: If you select Enable CE-Link Off, the remaining
items will be grayed out.
5Press B or b to highlight the CE-Link setup item you
want to use, and press C or c to select On or desired
mode.
•TV Auto Input Switch: On/Off
•TV Auto Power: On/Off
•Device Auto Standby: On/Off
•Speaker Preference: TV Speakers/Audio Receiver
(See left for detailed operation.)
6To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Installation
CE-Link Setup
Power-On Mode Power-Saving
Setup
Sleep Timer
PC Settings
Done
CE-Link Setup
Device Auto Standby
Reset
TV Auto Power Off
On
TV Speakers
Speaker Preference
TV Auto Input Switch
Enable CE-Link On
On
Done
CE-Link Setup
Device Auto Standby
Reset
TV Auto Power Off
On
TV Speakers
Speaker Preference
TV Auto Input Switch
Enable CE-Link On
On
42HL167_EN.book Page 65 Thursday, May 17, 2007 5:09 PM