Toshiba 42HP84 owner manual Connecting a DVD player or satellite receiver and a VCR

Connecting your TV

Connecting a DVD player or satellite receiver and a VCR

This connection allows you to watch DVD/satellite, VCR, and TV programs, and record one TV channel while watching another channel.

You will need:

¥two (or three, if satellite receiver is used) coaxial cables

¥one set of standard A/V cables (between the TV and VCR) (plus one additional set of standard A/V cables if satellite receiver is used)

¥one S-video cable (between the TV and DVD player/satellite receiver)

¥one pair of standard audio cables (between the TV and DVD player/satellite receiver)

Note:

For the highest possible picture quality from a DVD player or satellite receiver without component video or HDMI, use an S-video cable. (If your DVD player has component video, see page 13. If your DVD player or satellite receiver has HDMI or DVI, see page 16.)

Do not connect the DVD player/satellite receiver and VCR to the same set of Video inputs on the TV. (See the illustration, which shows the DVD player/satellite receiver connected to VIDEO 1 on the TV, and the VCR connected to VIDEO 2 on the TV.)

From						The unauthorized recording, use,
Antenna						distribution, or revision of television
						programs, videotapes, DVDs, and other
Stereo VCR						materials is prohibited under the
						Copyright Laws of the United States and
				IN		other countries, and may subject you to
	IN from ANT OUT to TV			OUT		civil and criminal liability.
	CH 3
	CH 4	VIDEO	L	R
				AUDIO
						TV
				AUDIO		DVD Player
				OUT
				L
				R
	S-VIDEO VIDEO
	OUT	OUT
						AUDIO
						OUT
					L	L
	IN from ANT				R	R
From				VIDEO
	S-VIDEO VIDEO
				OUT
Satellite	OUT	OUT
Dish	Satellite Receiver

12