169
Advanced features
Network Device Setup
11 Press the (/ arrow) buttons to adjust to the desired volume.
Press the OK button.
12 If you want to wake up the TV by using the Media Controller,
press the (/ arrow) buttons to select Ye s. Press the OK
button.
Device Name setup
The device name as a Media Renderer can be changed.
1Press the MENU button. Select NETWORK, Network
Device Setup, and then press the OK button.
2Press the (/ arrow) buttons to select Device Name Setup,
and then press the OK button.
3Select the Device Name field. Press the OK button. The
Software Keyboard screen appears.
4Input the device name by using the Software Keyboard. To
save your setting, press the BLUE button.
5Select Done. Press the OK button.
The maximum number of characters allowed for the device name is
15. Only 0-9, A - Z can be used in the device name.
Media Controller setup
You can limit which Media Controller can control this TV. If
Access Control is enabled, only those Media Controllers with a
check will be allowed to control the TV.
1Press the MENU button. Select NETWORK, Network
Device Setup, and then press the OK button.
2Press the (/ arrow) buttons to select Media Renderer
Setup, and then press the OK button.
3Press the (/ arrow) buttons to select Media Controller
Setup. Press the OK button.
4Press the (/ arrow) buttons to highlight Access Control.
Press the (/ arrow) buttons to select On.
5Press the (/ arrow) buttons to select Media Controller.
Press the OK button.
6Press the (/ arrow) buttons to select the MAC address of
Media Controller you want to accept.
NOTE