53
Initial Setup and Menu
Initial setup
5 ANT/CABLE
To select Antenna, first select Antenna. Then select Next.
(Sample Illustration) Selecting Antenna
To select Cable, first select Cable. Then select Next.
(Sample Illustration) Selecting Cable
If you do not want to scan channels, you do not need to make a
selection for ANT/CABLE. Select Next, and then press OK to skip
this step.
6 Start Scan
Select Start Scan. Press OK.
(Sample Illustration) Start Scan
If you want to stop scanning, pressing the EXIT button while
scanning is in process.
Antenna
Cable
Next
ANT/CABLE In
Antenna
Cable
Next
ANT/CABLE In
NOTE
Start Scan
Auto Tuning
Previous settings will be lost! Press EXIT for no change.
NOTE