Toshiba 43A10 of the screen you want to adjust, 2.Press y or z to highlight CONVERGENCE, To check and adjust the color convergence:

Introduction
Connecting	yourTV
Usingthe	RemoteControl
Settingup	yourTV
UsingtheTV’s	Features
Appendix
Index

To check and adjust the color convergence:1.Press MENU, then press x or • until the PICTURE menu appears.2.Press y or z to highlight CONVERGENCE.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

1			1
2			2
3			3
4			4
5			5
6			6
7	P I CTURE ANTENNA		7
8	MODE	SPORTS	8
9			9
10			10
11	FLESH TONE	ON	11
12			12
13	NO I SE REDUCTION	OFF	13
14	COLOR	COOL	14
15	TEMPERATURE		15
16	CONVERGENCE		16
17	SAVE NEW PREFERENCE		17
18			18

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

3. Press x or • to display the center CONVERGENCE menu.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

1				1
2				2
3				3
4				4
5				5
6				6
7				7
8				8
9				9
10				10
11				11
12				12
13				13
14	RED	BLUE		14
15	ENTER : TO SELECT COLOR			15
16				16
17	EX I T : TO SELECT		POS I T I ON	17
18				18

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

If you see separate red, blue, and green crossed lines (or red and blue shadows next to white lines), you need to adjust the convergence.

4.Press ENTER to highlight RED or BLUE, depending on which color needs adjusting. If both red and blue need adjusting, you will need to perform steps 4 and 5 twice.

5.Press y (up), z (down), x (left), or • (right) on the remote control to converge the red or blue lines into the green lines, which will turn completely white when correctly adjusted.

6.Press EXIT to display the circumference CONVERGENCE menu.7.Press the corresponding Number button (1–9) to select the areaof the screen you want to adjust.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

1						1
	1			2	3
2						2
3						3
4						4
5						5
6						6
7						7
8						8
9	4				6	9
10						10
11						11
12						12
13		PUSH	1 – 9			13
14						14
15						15
16						16
	7			8	9
17						17
18						18

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

8.Press ENTER to highlight RED or BLUE, depending on which color needs adjusting. If both red and blue need adjusting, you

will need to perform steps 8 and 9 twice for the selected area.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

1				1
2				2
3				3
4				4
5				5
6				6
7				7
8				8
9				9
10				10
11				11
12				12
13				13
14	RED	BLUE		14
15	ENTER : TO SELECT COLOR			15
16				16
17	EX I T : TO SELECT		POS I T I ON	17
18				18

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

9.Press yzx • to converge the red or blue line into the green line, which will turn completely white when correctly adjusted.

10.Press EXIT once to select another area to adjust, then repeat steps 7–9.11.Press EXIT twice to close the CONVERGENCE menu.

RECALL MUTE POWER

1 2 3

4 5 6

7	8	9
		CH RTN
100	0	ENT
	CH
VOL	MENU/	VOL
	ENTER
	CH
TV
CABLE	EXIT
VCR
	FAV CH	TV/VIDEO

Number

MENU/ENTER

yzx •

EXIT

20