Toshiba 43A10 Connecting a cable converter box, Connecting a cable converter box and a VCR, You will need:, one video cable, •one video cable, •three coaxial cables

Introduction

Connecting a cable converter box

This connection allows you to watch cable and premium channels.

You should keep your TV selected to ANT-1 so that you can use the TV features. When viewing premium channels, select ANT-2 and tune the TV to channel 3 or 4 (whichever channel is vacant in your area), then use the converter box to change channels.

You will need two coaxial cables.

TV From Cable

Connecting	yourTV
Usingthe	RemoteControl

AUDIO CENTER	ANT( 75 )
CHANNEL IN
	ANT-1

		ON	OFF
				OUT
			OUT
		R	L	VAR
				AUDIO
S-VIDEO				ANT-2
VIDEO	Y			VIDEO
	CB	L		L/
				MONO
L/ MONO
AUDIO	CR	AUDIO		AUDIO
R		R		R
	COLOR
				OUT IN
VIDEO 1 VIDEO 2	STREAM
	INPUT
IN	DVD IN		OUT

Cable converter box

Note:

When you use a converter box with your TV, there may be features that you cannot program using the remote control, such as programming your favorite channels, labeling channels, and locking channels.

Settingup	yourTV
UsingtheTV’s	Features
Appendix
Index

Connecting a cable converter box and a VCR

This connection allows you to watch and record basic and premium cable channels, as well as watch videotapes. You should keep your TV selected to ANT-1 so that you can use the TV’s features. When viewing premium channels or recording with the VCR, select ANT-2 and change the TV channel to 3 or 4 (whichever channel is vacant in your area), then use the converter box to change channels.

You will need:

•three coaxial cables

•one pair of audio cables (only one cable for a mono VCR)

•one video cable

TV		From Cable
			AUDIO CENTER			ANT( 75 )
			CHANNEL IN
						ANT-1
			ON	OFF
						OUT
				OUT			IN
			R	L	VAR
					AUDIO
S-VIDEO						ANT-2
							OUT
		Y			VIDEO			Cable converter box
VIDEO
		CB	L		L/
L/ MONO					MONO
AUDIO		CR	AUDIO		AUDIO
R			R		R
		COLOR
	VIDEO 1 VIDEO 2 STREAMINPUT
	IN	DVD IN		OUT
	L	R
		IN
						OUT to TV IN from ANT
		OUT					CH 3
VIDEO	L	R					CH 4
	AUDIO

Stereo VCR

Caution:

If you want to record one channel while watching another channel, a splitter (not included) must be added between the cable and ANT-1. One output of the splitter connects to ANT-1 and the second output connects to IN on the cable converter box.

If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable.

If you have an S-VHS VCR, use the S-video connections and remove the video cable. Do not connect the video cable and the S-video cable to Video-1 simultaneously.

When you use a converter box with your TV, there may be features that you cannot program using the remote control, such as programming your favorite channels, labeling channels, and locking channels.

6