49
Getting Started
Setting up your computer
5.375 x 8.375 ver 2.4.0
Installing additional memory (optional)
Your computer comes with enough memory to run most of
today’s popular applications. You may want to increase the
computer’s memory if you use complex software or process
large amounts of data.
There are two memory slots. Your system may have both
slots occupied.
You need a standard Phillips no. 1 screwdriver to install a
memory module.
CAUTION: To avoid damaging the computer’s screws, use a
standard Phillips no. 1 screwdriver that is in good condition.
CAUTION: Do not install or remove a memory module while the
DVD-ROM drive power is on.
If the computer is on, begin at step 1; otherwise, skip to step
3.
1If the computer is on, click Start, Turn Off Computer.
The Turn off computer window appears.
2Click Turn Off .
The operating system turns off the computer.
3Unplug and remove any cables connected to the
computer.
4Remove the battery.
5Close the display panel and turn the computer upside
down to locate the expansion memory slot cover to the
memory slot.