67
Getting Started
Using the computer for the first time
5.375 x 8.375 ver 2.4.0
Tap the icon in the bottom-right corner of the cPad
display screen to minimize the window
Tap the icon in the top-right corner of the cPad display
screen to maximize the window
❖Bring up the active program’s pull-down menus
To open a program menu, tap the icon in the upper-left
corner of the cPad display screen.
❖Bring up the Start menu
To open the Start menu, tap the icon in the bottom-left
corner of the cPad display screen.
Enabling the cPad Tap Zones
If the tap zones should become disabled, causing the icons to
disappear, you can enable them by doing the following:
1Access the Mouse Properties window in one of these
ways:
❖Press the TOSHIBA Console button and click the
Mouse icon in the TOSHIBA Console window.
❖Click the cPad icon on your system tray and select
TouchPad Properties from the menu.
❖Click Start, Control Panel, Printers and Other
Hardware, then the Mouse icon.
2Click the Tap Zones tab.
3Check the box next to Enable Tap Zones.
4Click Apply, then OK.
The tap zones are enabled.
Adjusting pointing device mode settings
To adjust the settings for pointing device mode:
1Click the cPad icon in the system tray.
A pull-down menu appears.