Toshiba 62HM15A owner manual Setup / Installation menu layout, Navigating the menu system

*The MENU button on the TV front touchpad functions as the ENTER button when a menu is on-screen.

Chapter 4: Menu layout and navigation

Setup / Installation menu layout (continued)

To open the Installation menu (illustrated below), press MENU on the remote control or TV front panel, open the Setup menu, select Installation, and press ENTER.

From Main Menu/Setup menu, select “Installation”

sub-menu➔

	➞ Input Configuration		➞ [ Input Configuration Window ]
Terrestrial	➞ Channel Program	➞➞	ANT1ANT2 } ➞ [ Scan for new channels on desired Antenna ]
	➞ Channel Add/Delete ➞ [ Channel Add / Delete Window ]
	➞ Signal Meter ➞ [ Signal Meter Window ]
Devices	➞ IEEE1394 Devices ➞ [ IEEE1394 Device Management Window ]
	➞ TheaterNet Devices		➞ [ TheaterNet Setup Window ]

TV Guide On Screen® Setup ➞ Start ➞ [ Launches TV Guide On Screen¨ system setup]

Time and Date ➞ Start Setup ➞ [ Time And Date Setup Window ]

System Status ➞ System Information ➞ [ System Information Window ]

Navigating the menu system

You can use the buttons on the remote
	TV front touchpad
control or TV front touchpad to access and
navigate your TV’s on-screen menu system.
• Press MENU to open the menu
system.
• Use the up/down/left/right arrow
		EXIT x	• z y MENU
buttons (yzx •) on the remote
control or TV front panel to move in				(ENTER*)
the corresponding direction in a menu.

• Press ENTER to save your menu settings or select a highlighted item. (A highlighted menu item appears in a different color in the menu.)

•All menus close automatically if you do not make a selection within 60 seconds, except the signal meter menu which closes automatically after 5 minutes.

•To close a menu instantly, press EXIT.

Remote control

MENU

ENTER

y

x •

z

EXIT

36 Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.

Downloaded from www.Manualslib.com manuals search engine