104 Learning the Basics
Using Hibernation
5.375 x 8.375 ver 3.1
Enabling the Hibernation command
Hibernation enabled is a default setting. If it should become
disabled, you can enable it as follows:
1Click Start, Control Panel.
The Control Panel window appears.
2Click Performance and Maintenance.
3Double-click the Tos hib a Po wer Sav er ic on.
The TOSHIBA Power Saver Properties window appears.
Sample TOSHIBA Power Saver Properties window
4Click the Hibernate tab, then click the Enable
hibernate support check box.
5Click OK to close the TOSHIBA Power Saver Properties
window, then close the Control Panel.