112 Learning the Basics
Using Standby
5.375 x 8.375 ver 3.1
To put the computer into Standby mode when you press the
power button or close the display panel, you must preset the
mode:
1Click Start, Control Panel.
The Control Panel window appears
2Click Performance and Maintenance.
3Double-click the Tos hib a Po wer Sav er icon .
The TOSHIBA Power Saver Properties window appears.
You can also access the TOSHIBA Power Saver Properties
window by using the TOSHIBA Console. See “TOSHIBA
Console” on page 189.
Sample TOSHIBA Power Saver Properties window
4Click Details in the Running on batteries section.
The Normal Power Properties window appears.