User’s Manual 9-4
Troubleshooting
System start-up When the computer does not start properly, check the following items:
■Self test
■Power Sources
■Power-on Password
Self test While booting up the computer, self test is executed automatically and the
following will be displayed:
This message remains on the screen for a few seconds.
If the self test is successful, the computer tries to load the operating system
according to how the Boot Priority option is set within the TOSHIBA HW
Setup program.
If any of the following conditions are present, the self test has failed:
■The computer stops and does not proceed to display information or
messages except for the TOSHIBA logo.
■Random characters appear on the screen and the system does not
function normally.
■The screen displays an error message.
In these instances, turn off the computer, check all cable connections and
then restart it. If the self test fails again, contact your reseller, dealer or
service provider.
Power When the computer is not plugged into an AC power outlet, the battery
pack is the primary power source. However, your computer also has a
number of other power resources, including an intelligent power supply and
a Real Time Clock (RTC) battery, all of which are interrelated with any one
having the ability to produce apparent power problems.
This section provides checklists for AC power and the battery. If you cannot
resolve a problem after following them, the cause may lie with another
power related resource - in such an instance you should contact your
reseller, dealer or service provider.
TOSHIBA Leading Innovation>>>