4 Replacement Procedures
4.5 Optical Drive Module
Removing the Optical Drive Module
To remove the optical drive module, follow the steps below:
1. Turn the computer upside down.
2. Remove one M2.5x5 screw securing the optical drive module into place.
3. Remove one M2.5x5 screw securing the wireless LAN compartment cover, then open it.
4. Insert your finger into the gap directly behind the ODD then press it gently to eject it
slightly from the ODD bay.
5. Slide the optical drive module from the bay.
Figure 4-8 Removing the optical drive module
Installing the Optical Drive Module
To install a device in the optical drive module bay, follow the steps below and refer to the figure
in the preceding section.
1. Slide the device into the optical drive module bay.
2. Use one M2.5x5 screw to secure it in position.
3. If you previously removed the wireless LAN compartment cover, then secure it in place with
one M2.5x5 screw.
4-14
[CONFIDENTIAL]
Satellite A80 /A85 Series Maintenance Manual