4 Replacement Procedures
4.9 Expansion Memory Module
Removing an Expansion Memory
To remove an expansion memory module, make sure the computer is in boot mode then:
1. Be sure the power is off and all cables are disconnected from the computer.
2. Turn the computer upside down and remove the battery pack. Loosen the embedded M2.5x5
screw securing the Wireless LAN compartment cover.
Figure 4-13 Removing the memory module cover
3. Slide your fingernail or a thin object under the cover and lift it off.
4. Push the latches to the outside to release a module. A spring will force one end of the
module up.
5. Grasp the module and pull it out.
Satellite A80 /A85 Series Maintenance Manual
[CONFIDENTIAL]
4-19