EO1-33013
27
5.3 Supplies5.3.1 Label Stock
B-443 is capable of both direct thermal and thermal transfer printing. Many
different direct thermal or thermal transfer stocks can be used. Refer to the
following list for specifications of compatible label media.
Media
Specification Label Tag
Min. 1” (25.4 mm) Min. 1” (25.4 mm)
Paper Width Max. 4.49” (114 mm) Max. 4.49” (114 mm)
Paper Weight Less than 240 g/m2
Length (Pitch) 0.4” (10 mm) ~ 90”(2286 mm) 0.4” (10 mm) ~ 90” (2286 mm)
Thickness 0.002” (0.05 mm) ~ 0.008” (0.20 mm)
Inner roll diameter. Max. 4.3” (110 mm)
Max. Roll Diameter.
(1” core) External roll diameter. Max. 8.4” (214 mm)
Roll Up Method Print surface is wound outside as standard
Paper Core ID. φ25.7 ± 0.3 mm
5.3.2 Ribbon
Standard 300m by 60 or 110mm thermal transfer ribbons with wax, wax-resin, or
resin coating (wound outside) are available from TOSHIBA TEC
CORPORATION. Of ribbon selection, it is recommended that the ribbon be at
least as wide as the print media. Also, the ribbon end should be transparent.