2. PRINTER SETUP

ENGLISH VERSION

2.2 Procedure before Operation

2.2Procedure before Operation

NOTE:

To communicate directly with a host computer, an RS-232C, Centronics, or USB cable is required.

(1)RS-232C cable: 9 pins

(do not use a null modem cable)

(2)Centronics cable: 36 pins

(3)USB cable: V1.1

NOTE:

Use of a Windows Driver will allow issuing media on the printer from a Windows application.

The printer can also be controlled with its own programming commands. For details, please contact your TOSHIBA TEC reseller.

2.3Turning the Printer

ON/OFF

2.3.1 Turning ON the Printer

CAUTION!

Use the power switch to turn the printer On/Off. Plugging or unplugging the power cord to turn the printer On/Off may cause fire, an electric shock, or damage to the printer.

NOTE:

If the Red Indicator Lamp is illuminated, go to Section 4.1, Troubleshooting Guide.

This section describes the outline of the printer setup.

1.Unpack the accessories and printer from the box.

2.Refer to Safety Precautions in this manual and set up the printer at a proper location.

3.Make sure that the Power Switch is off. (Refer to Section 2.3.)

4.Connect the printer to a host computer with an RS-232C, Centronics interface, or USB cable. (Refer to Section 2.4.)

5.Connect the Power Adapter to the printer, and then plug the Power Cord into a properly grounded power outlet. (Refer to Section 2.5)

6.Load the media. (Refer to Section 2.6.)

7.Load the ribbon. (Refer to Section 2.7.)

8.Adjust the position of the Feed Gap Sensor or Black Mark Sensor to match the media being used. (Refer to Section 2.8.)

9.Turn the Power ON. (Refer to Section 2.3.)

10.Install the Printer Drivers. (Refer to the Printer Driver in the CD- ROM.)

When the printer is connected to a host computer it is good practice to turn the printer ON before turning on the host computer and to turn OFF the host computer before turning off the printer.

1.To turn ON the printer power, press the power switch as shown in the diagram below. Note that ( ) is the power ON side of the switch.

Power Switch

2.Check that the Indicator Lamp is illuminated in green.

E2- 2

Page 10 Page 12
Page 11
Image 11
Toshiba BSV4TGS10QMR manual On/Off
Page 10 Page 12

BSV4TGS10QMR specifications

The Toshiba BSV4TGS10QMR is a highly advanced power amplifier that has garnered attention for its remarkable performance and versatility in various applications. This device is particularly suited for mobile communication systems, satellite communication, and broadcasting technologies, playing a crucial role in enhancing signal integrity and strength.

One of the most notable features of the BSV4TGS10QMR is its compact size, which facilitates easy integration into various devices without the need for significant redesigns. It is encapsulated in a small footprint package, which is essential for modern applications where space is at a premium. This amplifier's design also emphasizes thermal efficiency, ensuring that it can operate effectively even in demanding environments.

The BSV4TGS10QMR utilizes advanced GaN (Gallium Nitride) technology, which contributes to its high power density and efficiency. GaN technology is known for its ability to handle high voltages and deliver greater output power compared to traditional silicon-based options. This makes the BSV4TGS10QMR an excellent choice for applications requiring high linearity and wide bandwidth, as it maintains signal quality across a broad frequency range.

In terms of performance characteristics, the BSV4TGS10QMR exhibits impressive gain levels and low noise figures, making it an effective solution for boosting weak signals while minimizing distortion. Its robust design allows for a high degree of reliability, which is essential for mission-critical communications where any failure can lead to significant setbacks.

Another key feature of the BSV4TGS10QMR is its ability to support different modulation formats, which is crucial in today's diverse communication landscape. This adaptability allows the amplifier to be utilized in various systems, ranging from traditional radio frequency (RF) applications to cutting-edge digital communication networks.

Overall, the Toshiba BSV4TGS10QMR stands out as an exemplary power amplifier with a blend of compact design, advanced GaN technology, and impressive performance characteristics. Its versatility and reliability make it a valuable component for engineers and developers looking to enhance communication systems while ensuring efficient power usage and exceptional signal integrity. As technology continues to evolve, devices like the BSV4TGS10QMR will play a pivotal role in shaping the future of wireless communication and broadcasting industries.
Top Page Image Contents