Toshiba BSV4TGS10QMR manual A1.2 Options, A1.3 Media, A1.3.1 Media Type

APPENDIX 1 SPECIFICATIONS	ENGLISH VERSION
	A1.2 Options

A1.2 Options

Option Name	Type	Description
Keyboard display unit	KB-75-QM	This module is an external intelligent keyboard
		display unit.
Cutter module	B-SV204-QM	A cutter unit that makes stub cuts
	B-SV404-QM	A cutter unit that makes normal cuts.
Strip sensor	B-SV904-H-QM	When attached to the front of the Media Outlet, this
		sensor allows the on-demand strip issue by
		detecting the presence or lack of a label.
Memory module	B-SV704-E1M-QM (1MB)	A flash ROM memory PC board
	B-SV704-E2M-QM (2MB)
	B-SV704-E3M-QM (3MB)
	B-SV704-E4M-QM (4MB)
	B-SV704-E6M-QM (6MB)
	B-SV704-E8M-QM (8MB)
External media roll hanger	B-SV904-PH-QM	When this option is attached to the printer, a media
		roll with an outer roll diameter exceeding 127 mm
		(5”) can be used.
Linerless paper printing	B-SV904-LP-QM	This kit consists of a platen and a sheet which
kit		prevent the linerless paper from sticking to the
		printer inside.
LAN adapter	B-SV704-LAN-QQ	This option enables the printer to be used in a LAN
	(For AC100 to 120V)	network.
	B-SV704-LAN-QP
	(For AC200 to 240V)

NOTE:

The above options are available from your nearest TOSHIBA TEC representative or TOSHIBA TEC Head Quarters.

A1.3 Media

Please make sure that the media to be used is approved by TOSHIBA TEC. The warranties do not apply to problems caused by using media that is not approved by TOSHIBA TEC.

For information regarding TOSHIBA TEC-approved media, please contact a TOSHIBA TEC authorised representative.

A1.3.1 Media Type

Two types of media can be loaded for this thermal transfer and direct thermal printer: label or tag. The table below shows the size and shape of the media that can be used on this printer.

Label	Black Mark
￿	(on reverse side)
￿
	Cut position
	￿
	￿
￿	Feed Direction
￿	EA1- 2

Tag paper

	Black Mark
￿	(on reverse side)
	￿
	￿
￿
￿