HW Setup

Password

This option allows you to set or reset the user password for power on.

User Password

Lets you register a new password or change/remove an existing password.

Not Registered

Remove the password. (Default)

Registered

Set the password. A dialogue box will appear to

 

allow you to set the password.

To enter a user password:

1.Select Registered to display the following prompt:

Enter Password:

Enter a password. The character string you enter is displayed as a string of asterisk.

2.Click OK. The following message appears, allowing you to verify the password.

Verify Password:

3.If character strings match, the password is registered. Click OK. If they do not match, the following message appears. You must repeat from step 1.

Entry Error!!!

To delete a user password:

1.Select Not Registered to display the following prompt:

Enter Password:

2.Enter the currently registered password. The character string you enter is displayed as a string of asterisks.

3.Click OK. If the character string you enter matches the registered password, the password option is reset and the display changes to:

Not registered

If they do not match, the following message appears. You must repeat from step 1.

Incorrect Password.

Owner String

This blank field is used to display a message when the password field is displayed on startup. If a password is not registered the message will not be shown. The maximum length is 511 characters.

Display

This tab lets you customize your computer’s display settings for either the internal display or an external monitor.

User’s Manual

7-2