The Grand Tour

Underside

The following figure shows the underside of the computer. You should ensure that the display is closed before the computer is turned over to avoid causing any damage.

1

2

3

4

5

1.

Battery lock

4. Memory module slot

2.

Battery pack

5. Cooling vents

3.

Battery release latch

 

 

Figure 2-5 The underside of the computer

 

 

Battery lock

Slide the battery lock to release the battery pack

 

ready for removal.

 

 

Battery pack

The battery pack provides power to the computer

 

when the AC adaptor is not connected. For more

 

detailed information on the use and operation of

 

the battery pack please refer to Chapter 6, Power

 

and Power-Up Modes.

Battery release latch Slide and hold this latch into its "Unlock" position in order to release the battery pack for removal. For more detailed information on removing the battery pack please refer to Chapter 6, Power and Power-Up Modes.

Memory module slot The memory module slot allows for the installation, replacement and removal of additional memory module.

Refer to the Additional memory module section in Chapter 3, Hardware, Utilities and Options.

User’s Manual

2-5