User Programming
Feature Codes
Strata CIX and CTX IPT/DKT Telephone 08/07 135
Speed Dial (Storing an SD number)
Station2#66 + nnn + Phone No.3 + #
nnn = 100~199 SD bin numbers
System2#66 + nnn + Phone No.3 + #
nnn = 200~999 SD bin numbers
Speed Dial (Dialing a stored SD number)
Station2Spdial4 + nnn
nnn = 100~199 Station SD bin numbers
System2Spdial4 + nnn
nnn = 200~999 System SD bin numbers
Start Application #18
Travelling Class Override
Enter Code #471, then dial number (enter LCR code if required)
Change Code #69 + Index Number + old Code + # + new Code + #
Uniform Call Distribution
Login from Agent Station #6061
Logout from Agent Station #6062
Login to Agent Station–another Station #6161
Logout to Agent Station—another Station #6162
User Programming Mode #9876
Voice Mail (VM)
Direct Transfer to Voice Mail While on a call, press Cnf/Trn + #407. Dial VM mailbox
number (usually Ext. Number) + #.
Volume Control - Beep With handset off-hook, press #6101. Press Vol or .
Volume Control - Ringing With handset on-hook, press #6102. Press Vol or .
1. If you have “hot dialing,” you do not need to press Ext. button as part of the sequence.
2. Stations must be assigned/enabled SD capabilities in system programming by an Administrator in
Program 200-30 (System SD) and Program 200-35 (Station SD).
3. Refer to Table 7 on page 67 to see how to enter * and # into a speed dial number.
4. If your telephone does not have a Spdial button, press the * button, then dial the three digit
Speed Dial bin number (nnn).
Table 16 Feature Access Codes (continued)
Feature Feature Access Code Sequences1