Toshiba CS6910CL specifications This register is not used in this camera

(4) Access to Indirect Registers

To set the user-specified gamma table, use indirect access registers.

For indirect access, seven bytes of direct registers are used. These direct registers are as follows:

Target Address 0-7 Register	(Direct address: 0xB0)
Target Address 8-15 Register	(Direct address: 0xB1)
Target Address 16-23 Register	(Direct address: 0xB2)
Target Address 24-31 Register	(Direct address: 0xB3)
Target Address 32-39 Register	(Direct address: 0xB4
	* This register is not used in this camera.)
Data Register	(Direct address: 0xB5)
Data Length Register	(Direct address: 0xB6)
Sum Register	(Direct address: 0xB7)

The function of each register is as follows.

￿Target Address *-* Register

Indicates the address whose data is referred to or to which data is written.

￿Data Register

During read operation, data stored in the Target Address *-* register is read.

During write operation, the specified data is written to the Target Address *-* Register. When read or write operation is completed, the Target Address *-* Register is incremented.

￿Data Length Register

Set the number of bytes to be read continuously. (Specified value +1) bytes of data are read continuously.

If 0 is specified, one byte of data is read.

￿Sum Register

Every time a write or read command is executed for the Data Register, one-byte hexadecimal data read or written is added to the value of this register and the result is stored in this register.

When continuous write or continuous read is performed after 0x00 is written into this register, the camera side Check Sum of the data read or written data is stored after the continuous write or continuous read.

CCD color camera CS6910CL Specification (Rev.A) The contents described in this document may be changed without prior notice.

15

D4134419A