Toshiba D-R3 owner manual Clock Set

English - 25
This menu is used to set the current time.
You need to set the time to use timer recording.
1
With the unit in Stop mode, press the
MENU button.
2
Using the †… buttons, move the
selection bar to “Setup” then press OK
button to select.
3
Select “System” the †… buttons, then
press the √or OK button.
4
Select “Clock Set” using the †…
buttons, then press the √or OK button.
5
Use navigation †…œ √ buttons to input
Time, Date, Year. Use number button to
input clock data directly.
Clock Set
RETURNOKMOVE EXIT
Setup
DVD-RAM(VR)
System √√
Language √√
Audio √√
Video √√
Parental Control √√
RETURNOKMOVE EXIT
System
DVD-RAM(VR)
System √√
Language √√
Audio √√
Video √√
Parental Control √√
RETURNOKMOVE EXIT
System
DVD-RAM(VR)
Clock Set √√
Install √√
CM Skip Time : 15 Sec √√
AV1 Output : Video √√
NICAM : On √√
System Setup
6
Set Auto clock tap “On” or “Off” using
the …† buttons.
7
Press OK button, then the date and time
will be saved.
If you don’t press OK button, it will not be saved.
RETURNOKMOVE EXIT
Clock Set
DVD-RAM(VR)
Time Date Year
00
Auto Clock :
: THU
01 2004JAN12
Off
■ You must have the antenna connected to
set the Auto Clock.
See page 15 Connections.
■ Auto Clock : The recorder sets the clock
automatically by searching for a channel
that carries a time signal.
NOTE
00566A-D-R3_14~35 8/31/04 10:28 AM Page 25