Toshiba DK16 TABLE 1 -B (continued) MULTIDIMENSIONAL PROGRAM: PROGRAM 30, STATION CLASS OF SERVICE , 1-5

PROGRAMMINGPROCEDURES-INTRODUCTION
SECTION lOO-816-301
MARCH1993
TABLE 1 -B (continued)
MULTIDIMENSIONAL PROGRAM: PROGRAM 30,
STATION CLASS OF SERVICE
Press...
Step BUTTONS + LED keys
# Action description LCD RESPONSE . . .
6. LED keys 01 - 20 (continued)
LEDs 12 and 13 ON: Digital Telephone Handset
Receiver Volume
LED 14 ON: Account Codes Verified
LED 15 ON: Verified Account Code Revision Authority
LED 16 ON: Traveling Class of Service Code Revision
Authority
LED 17 ON: Do Not Disturb Override Allowed
LED 18 ON: Executive Override Allowed
LED 19 ON: Privacy Override Allowed
LED 20 ON: Not Used
If programming a port range, the LED indications are
as follows:
l LED-ON, all ports in range are enabled for that item.
l LED-OFF, all ports in range are disabled for that item.
l LED-FLASHING, some ports in range are enabled and
some ports are disabled.
7. HOLD 30 SELECT = (00 - 19)
Secure data in system programming. DATA PROGRAMMED
8. SPKR 30 SELECT =
Prepare system for another selection (go back to
step 5), or exit Program 30 (continue with step 9).
9. # # HOLD 30 SELECT = ##
Secure Program 30 data in system memory. DATA PROGRAMMED
IO. SPKR PROGRAM =
Exit Program 30. Enter another program number or exit
programming mode (go to step 11).
System beeps to indicate it is exiting Program 30.
11. # # HOLD NO. OF STATION (10 - 29)
Exit programming mode. JAN 20 SUN
06:58
1-5