Operation & Setup
Operation with the Strata CIX
Strata CIX DKT2404-DECT User Guide 04/09 25
Finish Talk Mode
When your call is complete, end the connection by pressing the TALK button on the
handset, or just place the handset on the charger.
Redial (Option)
If the Redial option is enabled, the Redial (F8 button) is used to invoke the operation.
Press the TALK or the speaker-icon button to get dial tone and then press the Redial
button. The last number dialed is shown in the LCD and the number is sent to the
Strata CIX for processing.
Redial digit length can be up to 32 digits. If, after talk mode is established, F8 is the
first button pressed, it acts as redial; in other cases, F8 operation is ignored (see
example below):
Channel Change
Channel change occurs automatically.
CIX No Service
In cases when the TALK or speaker-icon button is pushed and connection to the CIX
cannot be established, or if the base station doesn’t respond, the handset goes to idle
mode after blinking the following message for seven seconds: